Marantz Model SC-11S1 manual Additional Safety Information

Page 3

IMPORTANT SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to meet strict quality and safety standards.

There are, however, some installation and operation precautions which you should be particularly aware of.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Information!

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

When the switch is in the OFF position, the apparatus isn’t completely switched-off from the MAINS.

The equipment shall be installed near the Socket-Outlet and shall be easily accessible.

Do not touch hot spots during and immediately after use.

During and immediately after use, this product is hot in areas other than the controls and rear panel connection jacks. Do not touch hot spots and especially the top panel. Contact with hot areas can cause burns.

Do not expose the unit to excessive heat such as direct sunlight, fire or the like.

AMP_070719U2

Image 3
Contents Model SC-11S1 User Guide Risk of Electric Shock Do not Open Do not touch hot spots during and immediately after use Additional Safety InformationEnglish CE Marking Waarschuwingen Remote controller Checking the accessoriesContents Features Copyright Before UsingEquipment Mains Working Setting Inappropriate Places for InstallationPrecautions Loading batteriesOperational range Front Panel Names and Functions of Parts5Display Panel 4Power Indicator6OPERATE Indicator DisplayPhono Input Jacks Phono GND Terminal AC in Power Cable Connection SocketRemote Power Control Jack AMP Mode SwitchRemote Controller ¶ Remote Controller Operation for Marantz ¶ Remote Controller Operation for Marantz DVDSuper Audio CD Players Balanced Jacks ConnectionsSC-11S1 Connection Example with Input Source ComponentsSC-11S1 Connection example to power amplifierCh for SM-11S1 Connection Example 2 Stereo Complete Bi-amp Connection¶ About Complete Bi-Amp SC-11S1 for L chSC-11S1 for R ch CD PlayerFor front L/R SM-11S1 For front L/RSuper Audio CD Multi-channel Player For center/ subwooferFor center SM-11S1 For surround L/R SM-11S1 For surround L/R¶ ITU International Telecommunication Union Connecting the Power SupplyDisc Playback on an Analog Record Player Basic OperationPlayback Disc Playback on a Super Audio CD PlayerTone button HOW to USE and SET FeaturesHow to Set Attenuation Level ATT. Attenuation Subsonic FilterTrimming How to Trim Volume LevelHow to Trim Treble How to Trim BassHOW to Operate the Side Illumination BI-AMP ModeDisplay button Do not use connecting cables that contain resistance Remote Power ControlB.S Input Selector Power ON/OFF Switch Knob HOW to SET ID NumbersTroubleshooting Error MessagesProtective Circuits ¶ Dimensions Unit mm inch Specifications & Dimensional DrawingsCleaning of equipment external surfaces OthersRepairs 09/2007 00M22AJ851310 mzh-g