Table of Contents
Section 4: Accessories
Ball Swivel Hitch
Refer to Figure 4-1
The ball swivel hitch clamps firmly to your tractor’s drawbar. With this accessory the center deck can pivot about the drawbar in all directions reducing twisting torque and allowing the deck to mow a more evenly height. Hillsides and uneven terrain are ideal for its use. See you local Land Pride Dealer for the ball swivel hitch accessory.
Ball Swivel Hitch
Figure
Medium Lift Blades
Land Pride’s medium lift blades are great when horsepower is a concern. They produces a medium suction for lifting grass requiring less horsepower than high lift blades.
High Lift Blades
Land Pride’s high lift blades develop the greatest suction for lifting grass before cutting for that fresh clean cut look. However, they may require more horsepower especially when cutting tall dense grass. They are not recommended for sandy soil conditions.
Mulching Blades
Land Pride’s mulching blades are designed to chop leaves and/or grass into smaller parts leaving your lawn looking fresher and cleaner than ever before.
Accessory Part Numbers
Land Pride All-Flex Mower Accessories
Part No. | Part Description |
Ball Swivel Hitch
Low Lift Blades Kit for 1 unit (9 blades)
Medium Lift Blades Kit for 1 unit (9 blades)
High Lift Blades Kit for 1 unit (9 blades)
Mulching Blades Kit for 1 unit (9 blades)
Blades are also offered in Kits for 3 units (27 blades). See your Land Pride dealer for blade availability.
Cutting Blades
There are four blade choices to select from based upon soil condition, density of grass, and tractor horsepower. The appearance of the finish cut may vary between low lift and high lift blades. See your Land Pride dealer for blade availability.
Low Lift Blades
Land Pride’s low lift blades are designed for mowing over sandy soil terrain where high suction lift is not crucial. Sand sucked into the blades accelerates blade wear more than normal. Low lift blades are recommended because they produce a lower suction keeping sand uplift and blade wear to a minimum.
22 AFM4211 | 11/14/08 |