Feed cable into Case. Fit Earth sleeve (not supplied) and then strip insulation.
Do not twist cable cores.
Firmly connect the conductors. Do not exert strain on the terminal block.
Refit the Cover, making sure it is correctly located. Do not overtighten screws.
Caution! Handle glass cover assembly with care.
Do not use alternative screws to secure the Cover. This can cause internal damage to the appliance. Do not seal around the back of appliance.
When fitting the Cover, position the controls to correspond with the internal drive features as shown.
L = BROWN
E = GREEN/YELLOW N = BLUE
Cover Retaining
Screw
Cover
13