Kenmore 11, 5, 7, 3, 9 manual Wing Frame, Optional Castor Wheel Gang only

Page 50

WING FRAME

Optional Castor Wheel. 11 Gang only.

The Optional Castor Wheel is fitted to the outer Wing Frames to improve cutting performance when mowing on undulating ground.

Fig.44

The Spindle Support Bracket is bolted to the top of the modified frame tube, and behind the Jackshaft Bearings.

•Apply grease to the Spindle and the Wheel Hub - every week.

•Refer to the Tire Sidewall for recommended operating pressure.

•Inspect the tire daily for excessive wear, bulges or damage.

NOTE	Fig.44
A retrofit kit is available for this option

47

Image 50

Contents Kesmac Kesmac Transportable Reel Mowers ForewordSpecifications HOOK-UP to Tractor Contents Safety Precautions Vertical Mower General SafetyMaintenance Lift Cain Adjustment Eleven Gang Mowing ProcedureIf you do not understand……….ASK Be a Qualified Operator by Safety Precautions General SafetyMaintenance Safety Before Operating the MowerDuring Maintenance Safety Alert SymbolDECALS. See Pages 5 & 6 also Page Page Operating Conditions Main and Outrigger Mainwheel BearingsTires Turf tires are not designed for use on highwaysDaily Inspection Reel Drive Belts Daily Inspection Drive Belts and SheavesPrimary Belts Daily Inspection PTO Shaft Tongue TubeGuards and Decals This check should be done at regular service intervalsDaily Inspection Hydraulic System To do so may result in serious personal injuryMower Transport Wheel Bearing Service Life Do not set the tractor engine RPM too high Transport Safety ChainsTransport Lowering the Reels Lifting the ReelsHydraulic Lift Operation REEL/WING Lift Sequence REEL/WING Lower SequenceHydraulic Lift Operation REEL/WING Lift Sequence Sequence Valve Setting , 9 & 11 Gang only Relief Valve Setting Lift Chain Adjustments Reels 4Lift Chains Adjustment Reels 4 and 5Cutting Height Adjusment Cutting Height Adjustment FAIRWAY. Floating Head Reel to BED Knife Adjustment Pre-single point adjustment unitsReel to BED-KNIFE Single Point Adjustment Vertical MOWER. Depth of CUT Adjustment Drive Belt AdjustmentVertical Mower Operation Hours Routine MaintenanceHours or Weekly Annual Maintenance Inspection = Grease. B = Oil LubricationGearbox Lubrication Gearbox Lubrication Main Wheel Axle Assembly . From Feb.07 Cones as assembliesMain Wheel Axle Assembly. Serial No’s 357 to February Outrigger Single Wheel. From Serial No Single Outrigger Wheel Dual Outrigger WheelsWing Kick Springs Main Drive Belts Reel Drive Belts Maintenance Maintenance Shafts must be set-up as illustrated Main Jackshaft Bearing replacementPTO Shaft SET- UP Specifications Gang Gang 7-Gang 5-Gang Gang 9-GangSTEP-UP Drive Ratio Specifications Primary DriveTractor POWER. Nominal Number of ReelsBacklapping Attachment Hydraulic OperationBacklapping Operation Reel and Bedknife Sharpening Wing Frame Optional Castor Wheel Gang onlyLift Chains Attachment Points Size Plated Plain Torque GuideGrade 5 and 8 Fasteners. Coarse Thread

Related manuals

Manual 44 pages 60.15 Kb