Kenmore 7, 11, 5, 3, 9 manual Transport Wheel Bearing Service Life

Page 17

HOOK-UP TO TRACTOR

Connect the Mower ‘Quick Connects’ to the tractor accessory hydraulic connections. Keep the hydraulic connections clean.

WARNING

Relieve any hydraulic pressure in the mower hydraulic system before connecting the mower to the tractor hydraulic system. Failure to do so could result in serious personal injury

.

Fig.9

To relieve pressure in the Mower Hydraulic System press the plunger ‘A’ in the Disconnect, ‘inwards.’

WARNING

Use a suitable tool or piece of wood, do not use your fingers as this could result in serious injury.

Direct the disconnect away from your person.

TRANSPORT

WHEEL BEARING SERVICE LIFE

In the mowing mode the Main Wheel Bearings on all models have a service life of approximately 20,000 hours.

In the transport mode the bearing service life varies from model to model.

For example :

11 Gang 500 Hours.

9 Gang 750 Hours

7 Gang 850 Hours.

5 Gang 1400 Hours.

CAUTION

Maintain the correct tire pressures, as shown on the tire sidewall.

Do not tow a Mower that is fitted with Turf Tires on the highway.

Fig.9

14

Image 17
Contents Kesmac Foreword Kesmac Transportable Reel MowersMaintenance Contents Safety Precautions Vertical Mower General SafetySpecifications HOOK-UP to Tractor Lift Cain Adjustment Eleven Gang Mowing ProcedureIf you do not understand……….ASK Maintenance Safety Safety Precautions General SafetyBe a Qualified Operator by Before Operating the MowerSafety Alert Symbol During MaintenanceDECALS. See Pages 5 & 6 also Page Page Operating Conditions Tires Mainwheel BearingsMain and Outrigger Turf tires are not designed for use on highwaysDaily Inspection Reel Drive Belts Daily Inspection Drive Belts and SheavesPrimary Belts Tongue Tube Daily Inspection PTO ShaftDaily Inspection Hydraulic System This check should be done at regular service intervalsGuards and Decals To do so may result in serious personal injuryMower Transport Wheel Bearing Service Life Transport Lowering the Reels Transport Safety ChainsDo not set the tractor engine RPM too high Lifting the ReelsREEL/WING Lower Sequence Hydraulic Lift Operation REEL/WING Lift SequenceHydraulic Lift Operation REEL/WING Lift Sequence Sequence Valve Setting , 9 & 11 Gang only Relief Valve Setting Reels 4 Lift Chain AdjustmentsReels 4 and 5 Lift Chains AdjustmentCutting Height Adjusment Cutting Height Adjustment FAIRWAY. Floating Head Pre-single point adjustment units Reel to BED Knife AdjustmentReel to BED-KNIFE Single Point Adjustment Drive Belt Adjustment Vertical MOWER. Depth of CUT AdjustmentVertical Mower Operation Hours Routine MaintenanceHours or Weekly Annual Maintenance Inspection Lubrication = Grease. B = OilGearbox Lubrication Gearbox Lubrication Cones as assemblies Main Wheel Axle Assembly . From Feb.07Main Wheel Axle Assembly. Serial No’s 357 to February Single Outrigger Wheel Dual Outrigger Wheels Outrigger Single Wheel. From Serial NoWing Kick Springs Main Drive Belts Reel Drive Belts Maintenance Maintenance Shafts must be set-up as illustrated Main Jackshaft Bearing replacementPTO Shaft SET- UP Gang Gang 7-Gang 5-Gang Gang 9-Gang SpecificationsTractor POWER. Nominal Specifications Primary DriveSTEP-UP Drive Ratio Number of ReelsHydraulic Operation Backlapping AttachmentBacklapping Operation Reel and Bedknife Sharpening Optional Castor Wheel Gang only Wing FrameLift Chains Attachment Points Size Plated Plain Torque GuideGrade 5 and 8 Fasteners. Coarse Thread
Related manuals
Manual 44 pages 60.15 Kb