Grizzly T23108 owner manual Installing Grinding Wheel, To install the grinding wheel

Page 16

Installing Grinding

Wheel

To install the grinding wheel:

1.DISCONNECT MACHINE FROM POWER!

2.Select the correct grinding wheel for your chain (refer to Grinding Wheel Selection on

Page 20 for detailed information).

3.Perform the Wheel Inspection & Ring Test procedure as instructed on Page 21. If the wheel does not pass visual inspection or the ring test—DO NOT use it!

4.If necessary, dress the wheel (refer to

Dressing Grinding Wheel on Page 29 for detailed information).

5.If installed, remove the arbor and wheel safety guards, as shown in Figure 12, by unthreading the two hex bolts that secure them.

Arbor

Wheel& Flanges

Guard

 

 

Arbor

Hex Bolts

 

Guard

 

 

 

Figure 12. Safety guards removed.

-14-

6.Remove the arbor cap screw and outer flange, then place the grinding wheel on the inner flange.

7.Replace the outer flange and arbor cap screw, then tighten the cap screw to approxi- mately 60 inch pounds.

Over-tightening the arbor cap screw could cause the grinding wheel to crack and break apart during operation, which would send flying debris at the operator. DO NOT over- tighten the arbor cap screw. If possible, use a torque wrench to ensure that the cap screw is not tightened more than 60 inch pounds.

8.Replace the wheel and arbor safety guards (see Figure 13).

Figure 13. Grinding wheel and safety guards

installed.

During operation, sparks and debris are thrown from the wheel and chain. To reduce the risk of operator injury from this mate- rial, ALWAYS make sure the wheel and arbor safety guards are correctly installed before connecting the sharpener to power!

Model T23108 (Mfg. Since 7/10)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Chain SAW Sharpener Page Table of Contents Introduction Manual AccuracyContact Info Machine DescriptionIdentification ON/OFFSafety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Power Supply Single-PhaseFull-Load Current Rating at Amps Nominal Voltage 110V/120VMinimum Gauge Size 14 AWG 50 ftSetup Needed for SetupUnpacking Description QtyInventory Inventory Figure QtyWeight Load Site ConsiderationsWorkbench MountingMachine Base Workbench Assembly To assemble the sharpenerInstalling Grinding Wheel To install the grinding wheelPower Connection To test run the machineOperations Chain Saw TerminologyChain Pitch Drive LinkPage How the Chain Cuts Grinding Wheel Selection Wheel Inspection Ring Test To perform a ring testTo set up the chain holder for the top plate angle Top Plate AngleTop Plate Cutting Angle Gullet Angle To tilt the chain holder for a 10 gullet angleSharpening Operation To sharpen the chain cuttersAdvancement guide and controls Depth stop and controls Clamp Plate Adjustment Depth Gauge SettingTo adjust the clamp plate pressure Maintenance CleaningSchedule LubricationService TroubleshootingWiring Wiring Safety InstructionsT23108 Wiring Diagram T23108 wiringBreakdown Diagram PartsParts List DescriptionWarranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents