Grizzly T23108 owner manual Gullet Angle, To tilt the chain holder for a 10 gullet angle

Page 26

Gullet Angle

On most chains, the bottom edge of the cutter gullet must have a 10° downward angle from the outside to the inside of the cutter link, as shown in Figure 28. This angle forces wood chips into the path of the top plate for removal.

Lock

Knob

Casting Tilt

Marks

Base

Mark

Gullet

Angle

Figure 28. Location of the cutter gullet angle.

The gullet angle is determined by the tilt of the chain holder. The chain holder can be tilted to 0° or 10° in and out.

Note: Always refer to the chain manufacturer's specifications when setting up the sharpener. However, if this information is not available, use the chart in Figure 22 on Page 20 as a general guide.

If your chain requires a 10° gullet angle, align the outside casting tilt mark with the base mark when sharpening right-hand cutters (see Figures 29–30). Conversely, align the inside casting tilt mark with the base mark when sharpening left- hand cutters.

Figure 29. Aligning the chain holder tilt marks.

Outside Tilt Mark

Aligned for

Right-Hand Cutter

Inside Tilt Mark

Aligned for

Left-Hand Cutter

Figure 30. Chain holder tilt marks aligned for

left- and right-hand cutters.

To tilt the chain holder for a 10° gullet angle:

1.DISCONNECT MACHINE FROM POWER!

2.Loosen the chain holder lock knob (see Figure 29) three or four rotations.

3.Tilt the chain holder so that the correct cast- ing tilt mark aligns with the base mark, as illustrated in Figure 30. This will produce a 10° gullet angle when sharpening.

4.Retighten the lock knob, then check to make sure the tilt marks are properly aligned.

5.To bring the chain holder back to 0°, align the casting center tilt mark with the base mark.

-24-

Model T23108 (Mfg. Since 7/10)

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Chain SAW Sharpener Page Table of Contents Contact Info IntroductionManual Accuracy Machine DescriptionIdentification ON/OFFSafety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Full-Load Current Rating at Amps Power SupplySingle-Phase Nominal Voltage 110V/120VMinimum Gauge Size 14 AWG 50 ftUnpacking SetupNeeded for Setup Description QtyInventory Inventory Figure QtyWeight Load Site ConsiderationsMachine Base Workbench MountingWorkbench Assembly To assemble the sharpenerInstalling Grinding Wheel To install the grinding wheelPower Connection To test run the machineOperations Chain Saw TerminologyChain Pitch Drive LinkPage How the Chain Cuts Grinding Wheel Selection Wheel Inspection Ring Test To perform a ring testTo set up the chain holder for the top plate angle Top Plate AngleTop Plate Cutting Angle Gullet Angle To tilt the chain holder for a 10 gullet angleSharpening Operation To sharpen the chain cuttersAdvancement guide and controls Depth stop and controls To adjust the clamp plate pressure Depth Gauge SettingClamp Plate Adjustment Schedule MaintenanceCleaning LubricationService TroubleshootingWiring Wiring Safety InstructionsT23108 Wiring Diagram T23108 wiringBreakdown Diagram PartsParts List DescriptionWarranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents