Grizzly T23108 owner manual Assembly, To assemble the sharpener

Page 15

Assembly

The Model T23108 is shipped partially assembled. Perform the following procedure to complete the assembly.

To assemble the sharpener:

1.Make sure the base is firmly mounted to the workbench.

2.Insert the swing arm pivot stud into the matching hole in the vertical face of the base (see Figure 8).

Base

Vertical Face

Pivot Stud

& Hole

Figure 8. Swing arm pivot stud and matching

hole.

3.While holding the swing arm in place, insert the M10-1.5 x 40 hex bolt through the hex- shaped hole in the swing arm vertical face, then secure the arm to the base with the 10mm fender washer and M10-1.5 lock knob, as shown in Figures 9–10.

Swing Arm

Assembly

Hex Bolt

Figure 9. Swing arm hex bolt inserted.

Lock

Knob

Figure 10. Swing arm lock knob installed.

4.Thread the handle onto the end of the swing arm, as shown in Figure 11.

Handle

Figure 11. Swing arm handle attached.

Model T23108 (Mfg. Since 7/10)

-13-

Image 15

Contents Chain SAW Sharpener Page Table of Contents Machine Description IntroductionManual Accuracy Contact InfoON/OFF IdentificationSafety Instructions for Machinery SafetyUnattended OPERATION. Never leave Additional Safety for Chain Saw Sharpeners Nominal Voltage 110V/120V Power SupplySingle-Phase Full-Load Current Rating at Amps50 ft Minimum Gauge Size 14 AWGDescription Qty SetupNeeded for Setup UnpackingInventory Figure Qty InventorySite Considerations Weight LoadMounting WorkbenchMachine Base Workbench To assemble the sharpener AssemblyTo install the grinding wheel Installing Grinding WheelTo test run the machine Power ConnectionChain Saw Terminology OperationsDrive Link Chain PitchPage How the Chain Cuts Grinding Wheel Selection To perform a ring test Wheel Inspection Ring TestTop Plate Angle To set up the chain holder for the top plate angleTop Plate Cutting Angle To tilt the chain holder for a 10 gullet angle Gullet AngleTo sharpen the chain cutters Sharpening OperationAdvancement guide and controls Depth stop and controls Depth Gauge Setting Clamp Plate AdjustmentTo adjust the clamp plate pressure Lubrication MaintenanceCleaning ScheduleTroubleshooting ServiceWiring Safety Instructions WiringT23108 wiring T23108 Wiring DiagramParts Breakdown DiagramDescription Parts ListComments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.