Grizzly T23108 owner manual Sharpening Operation, To sharpen the chain cutters

Page 27

Sharpening

Operation

In the following sharpening procedure, you adjust the sharpener settings to grind the correct angles for the chain, then sharpen each cutter link one at a time.

After properly sharpening all of the cutter links, you need to check, and if necessary, adjust the depth gauge setting—the distance between the top plate leading edge and the top of the depth gauge. Even though the cutter may be properly sharpened, if the depth gauge setting is not cor- rect, the chain will not effectively cut the wood.

The T23108 is not designed to adjust the depth gauge setting, and it is beyond the scope of this manual to explain the many methods to perform this important task (refer to Depth Gauge Setting on Page 28 for additional information).

To sharpen the chain cutters:

1.Clean the chain with a non-flammable clean- er to remove any oil, dirt, and grime, then use compressed air to thoroughly dry the chain.

2.Visually inspect the chain and replace any severely damaged links that could break apart during sharpening. If replacement is not possible, use a different chain.

3.Make sure all of the cutter top plates will be at least 1⁄4" in length after the sharpening proce- dure is completed. This is the recommended minimum top plate length to avoid the cutter link from breaking apart during cutting opera- tion.

—If you suspect that any cutter top plate will be shorter than 1⁄4" in length after being sharpened, replace that link or replace the chain.

4.DISCONNECT MACHINE FROM POWER!

5.Read and understand all the safety instruc- tions listed in the beginning of this manual and included with the chain saw owner's manual.

6.Make sure the sharpener is firmly secured to the workbench.

7.Select and test the grinding wheel that is right for your chain, as instructed in the Wheel Inspection & Ring Test procedure on Page 21.

8.After successful completion of Step 7, install the grinding wheel onto the sharpener, as instructed in the Installing Grinding Wheel procedure on Page 14.

NOTICE

Always refer to the chain manufacturer's specifications when setting up the sharp- ener. However, if this information is not available, use the chart in Figure 22 on Page 20 as a general guide.

Note: The following instructions begin by sharpening the right-hand cutters. If you choose to start with left-hand cutters, keep in mind the chain holder rotation angle and, if used, chain holder tilt will be different.

9.Rotate the chain holder counterclockwise (looking down on it) and align it with the cor- rect rotation angle mark on the scale for the chain, as instructed in the Top Plate Angle procedure on Page 22. This setting deter- mines the top plate angle.

10.If required for your chain, set the grinding wheel tilt to provide the correct gullet angle, as instructed in the Gullet Angle procedure on Page 24.

Model T23108 (Mfg. Since 7/10)

-25-

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Chain SAW Sharpener Page Table of Contents Machine Description IntroductionManual Accuracy Contact InfoON/OFF IdentificationSafety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Nominal Voltage 110V/120V Power SupplySingle-Phase Full-Load Current Rating at Amps50 ft Minimum Gauge Size 14 AWGDescription Qty SetupNeeded for Setup UnpackingInventory Figure Qty InventorySite Considerations Weight LoadMounting WorkbenchMachine Base Workbench To assemble the sharpener AssemblyTo install the grinding wheel Installing Grinding WheelTo test run the machine Power ConnectionChain Saw Terminology OperationsDrive Link Chain PitchPage How the Chain Cuts Grinding Wheel Selection To perform a ring test Wheel Inspection Ring TestTop Plate Angle To set up the chain holder for the top plate angleTop Plate Cutting Angle To tilt the chain holder for a 10 gullet angle Gullet AngleTo sharpen the chain cutters Sharpening OperationAdvancement guide and controls Depth stop and controls Depth Gauge Setting Clamp Plate AdjustmentTo adjust the clamp plate pressure Lubrication MaintenanceCleaning ScheduleTroubleshooting ServiceWiring Safety Instructions WiringT23108 wiring T23108 Wiring DiagramParts Breakdown DiagramDescription Parts ListComments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents