Grizzly T23108 owner manual Service, Troubleshooting

Page 32

SECTION 6: SERVICE

Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel- ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support at (570) 546-9663.

Troubleshooting

Symptom

Possible Cause

Possible Solution

 

 

 

 

 

Machine does

1.

Power supply switched OFF or at fault.

1.

Ensure power supply is ON/has correct voltage.

not start or a

2.

Plug/receptacle at fault/wired wrong.

2.

Test for good contacts; correct the wiring.

breaker trips.

3.

Start capacitor at fault.

3.

Test/replace if faulty.

 

 

4.

Wall circuit breaker tripped.

4.

Ensure circuit size is correct/replace weak breaker.

 

5.

Wiring open/has high resistance.

5.

Check/fix broken, disconnected, or corroded wires.

 

6.

Motor ON/OFF switch at fault.

6.

Replace switch.

 

7.

Motor connection wired wrong.

7.

Correct motor wiring connections.

 

8.

Motor at fault.

8.

Test/repair/replace.

 

 

 

 

 

Machine stalls

1.

Motor wired incorrectly.

1.

Wire motor correctly.

or is overloaded.

2.

Plug/receptacle at fault.

2.

Test for good contacts/correct wiring.

 

3.

Motor bearings at fault.

3.

Test/repair/replace.

 

4.

Operation overloading motor.

4.

Dress grinding wheel or replace it; reduce the

 

 

 

 

feed rate; make sure sharpener settings are

 

 

 

 

correct for the chain.

 

5.

Motor overheated.

5.

Clean motor, let cool, and reduce workload.

 

6.

Motor at fault.

6.

Test/repair/replace.

 

 

 

 

 

Machine has

1.

Motor or component loose.

1.

Inspect/replace damaged bolts/nuts, and

vibration or

 

 

 

re-tighten with thread locking fluid.

noisy operation.

2.

Grinding wheel at fault/arbor hole not

2.

Inspect/dress/replace grinding wheel.

 

 

 

round.

 

 

 

3.

Incorrectly mounted to workbench.

3.

Tighten mounting hardware; use shims if

 

 

 

 

necessary.

 

4.

Motor fan rubbing on fan cover.

4.

Fix/replace fan cover; replace loose/damaged fan.

 

5.

Motor bearings at fault.

5.

Test by rotating shaft; rotational grinding/loose

 

 

 

 

shaft requires bearing replacement.

 

6.

Motor shaft bent.

6.

Test with dial indicator and replace motor.

 

 

 

 

 

Cutter edges

1.

Not using correct grinding wheel.

1.

Use the correct size and grit grinding wheel;

burned or

 

 

 

inspect, and if necessary, dress or replace wheel.

discolored; not

2.

Sharpener settings not correct.

2.

Make sure the sharpener settings are correct

being properly

 

 

 

for the chain.

sharpened.

 

 

 

3.

User placing grinding wheel against

3.

Raise the grinding wheel away from the cutter

 

 

 

cutter too long or too hard during

 

as soon as the depth bolt hits the depth stop.

 

 

sharpening operation.

 

 

 

 

 

 

 

Chain saw not

1.

Sharpener settings not correct.

1.

Make sure the sharpener settings are correct

cutting or self-

 

 

 

for the chain.

feeding.

2.

Depth gauge settings not correct.

2.

Check and adjust the all depth gauge settings.

 

 

3.

Chain dulls quickly.

3.

Cutter links over-heated during sharpening;

 

 

 

 

replace links/chains.

 

 

 

 

 

-30-

 

 

 

Model T23108 (Mfg. Since 7/10)

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Chain SAW Sharpener Page Table of Contents Introduction Manual AccuracyContact Info Machine DescriptionIdentification ON/OFFSafety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Power Supply Single-PhaseFull-Load Current Rating at Amps Nominal Voltage 110V/120VMinimum Gauge Size 14 AWG 50 ftSetup Needed for SetupUnpacking Description QtyInventory Inventory Figure QtyWeight Load Site ConsiderationsMachine Base Workbench MountingWorkbench Assembly To assemble the sharpenerInstalling Grinding Wheel To install the grinding wheelPower Connection To test run the machineOperations Chain Saw TerminologyChain Pitch Drive LinkPage How the Chain Cuts Grinding Wheel Selection Wheel Inspection Ring Test To perform a ring testTo set up the chain holder for the top plate angle Top Plate AngleTop Plate Cutting Angle Gullet Angle To tilt the chain holder for a 10 gullet angleSharpening Operation To sharpen the chain cuttersAdvancement guide and controls Depth stop and controls To adjust the clamp plate pressure Depth Gauge SettingClamp Plate Adjustment Maintenance CleaningSchedule LubricationService TroubleshootingWiring Wiring Safety InstructionsT23108 Wiring Diagram T23108 wiringBreakdown Diagram PartsParts List DescriptionWarranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents