Grizzly T23108 Power Supply, Full-Load Current Rating at Amps, Nominal Voltage 110V/120V, 60 Hz

Page 9

SECTION 2: POWER SUPPLY

Availability

Before installing the machine, consider the avail- ability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed. To minimize the risk of electrocu- tion, fire, or equipment damage, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards.

Electrocution, fire, or equipment damage may occur if machine is not correctly grounded and connected to the power supply.

Full-Load Current Rating

The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple motors, this is the amperage drawn by the largest motor or sum of all motors and electrical devices that might operate at one time during normal operations.

Full-Load Current Rating at 110V

2 Amps

The full-load current is not the maximum amount of amps that the machine will draw. If the machine is overloaded, it will draw additional amps beyond the full-load rating.

If the machine is overloaded for a sufficient length of time, damage, overheating, or fire may result— especially if connected to an undersized circuit. To reduce the risk of these hazards, avoid over- loading the machine during operation and make sure it is connected to a power supply circuit that meets the requirements in the following section.

Circuit Requirements

This machine is prewired to operate on a 110V power supply circuit that has a verified ground and meets the following requirements:

Nominal Voltage

................................ 110V/120V

Cycle

60 Hz

Phase

Single-Phase

Circuit Size

15 Amps

A power supply circuit includes all electrical equipment between the main breaker box or fuse panel in your building and the incoming power connections inside the machine. This circuit must be safely sized to handle the full-load current that may be drawn from the machine for an extended period of time.

For your own safety and protection of property, consult a qualified electrician if you are unsure about wiring practices or electrical codes in your area.

Note: The circuit requirements listed in this man- ual apply to a dedicated circuit—where only one machine will be running at a time. If this machine will be connected to a shared circuit where mul- tiple machines will be running at the same time, consult a qualified electrician to ensure that the circuit is properly sized for safe operation.

Model T23108 (Mfg. Since 7/10)

-7-

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Chain SAW Sharpener Page Table of Contents Manual Accuracy IntroductionContact Info Machine DescriptionON/OFF IdentificationSafety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Single-Phase Power SupplyFull-Load Current Rating at Amps Nominal Voltage 110V/120V50 ft Minimum Gauge Size 14 AWGNeeded for Setup SetupUnpacking Description QtyInventory Figure Qty InventorySite Considerations Weight LoadMounting WorkbenchMachine Base Workbench To assemble the sharpener AssemblyTo install the grinding wheel Installing Grinding WheelTo test run the machine Power ConnectionChain Saw Terminology OperationsDrive Link Chain PitchPage How the Chain Cuts Grinding Wheel Selection To perform a ring test Wheel Inspection Ring TestTop Plate Angle To set up the chain holder for the top plate angleTop Plate Cutting Angle To tilt the chain holder for a 10 gullet angle Gullet AngleTo sharpen the chain cutters Sharpening OperationAdvancement guide and controls Depth stop and controls Depth Gauge Setting Clamp Plate AdjustmentTo adjust the clamp plate pressure Cleaning MaintenanceSchedule LubricationTroubleshooting ServiceWiring Safety Instructions WiringT23108 wiring T23108 Wiring DiagramParts Breakdown DiagramDescription Parts ListComments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents