Grizzly T23108 owner manual Advancement guide and controls

Page 28

If the grinding wheel should break apart during operation, the only thing between you and the flying debris of the wheel are the wheel and arbor safety guards. ALWAYS make sure the wheel and arbor safety guards are properly secured in place before con- necting the machine to power!

11.Use the clamp lever (see Figure 31) to set the gap between the clamp plates to match the chain gauge, which will allow the chain to easily move along the top of the clamping bars in the same manner it moves along the chain saw bar.

Clamp Plates

Clamp

Lever

Figure 31. Clamp lever and clamp plates.

12.Locate the cutter link with the shortest top plate length and position the chain so that this link is under the grinding wheel. This will be the first link sharpened.

Use chalk or a marker to note the first link to be sharpened so that you will know when you are finished with that side of cutters.

Note: If all of the top plates are approximately the same length, then start with any cutter. The concern is that all top plates are the same length when the sharpening operation is complete to ensure they cut away the same amount during operation.

13.Position the edge of the advancement guide behind the cutter to be sharpened, then pull the chain to the left until the guide catches and stops the chain (see Figure 32).

Advancement

Guide

Guide

Adjustment Controls

Figure 32. Advancement guide and controls.

Note: Attaining the proper setting for the advancement guide is a matter of patience and trial-and-error. This setting is critical to properly sharpen the cutters, so take the time to find the correct setting.

The goal is to position the cutter in relation to the grinding wheel so that all three angles— the top plate angle, the top plate cutting angle, and the gullet angle—will be correctly sharpened.

14.With the machine still disconnected from power, lower the grinding wheel into the gul- let.

—If the wheel matches the gullet profile and is against the top and side plates when com- pletely lowered, the advancement guide is properly set for now. Tighten the knob lock nut on the adjustment controls behind the guide to secure the setting.

—If the wheel hits the top plate or depth gauge and does not completely lower into the gullet, or it is not against the top and side plates, adjust the advancement guide until it successfully stops the chain in the proper position. Be sure to secure the set- ting by tightening the knob lock nut.

-26-

Model T23108 (Mfg. Since 7/10)

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Chain SAW Sharpener Page Table of Contents Introduction Manual AccuracyContact Info Machine DescriptionIdentification ON/OFFSafety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Power Supply Single-PhaseFull-Load Current Rating at Amps Nominal Voltage 110V/120VMinimum Gauge Size 14 AWG 50 ftSetup Needed for SetupUnpacking Description QtyInventory Inventory Figure QtyWeight Load Site ConsiderationsWorkbench MountingMachine Base Workbench Assembly To assemble the sharpenerInstalling Grinding Wheel To install the grinding wheelPower Connection To test run the machineOperations Chain Saw TerminologyChain Pitch Drive LinkPage How the Chain Cuts Grinding Wheel Selection Wheel Inspection Ring Test To perform a ring testTo set up the chain holder for the top plate angle Top Plate AngleTop Plate Cutting Angle Gullet Angle To tilt the chain holder for a 10 gullet angleSharpening Operation To sharpen the chain cuttersAdvancement guide and controls Depth stop and controls Clamp Plate Adjustment Depth Gauge SettingTo adjust the clamp plate pressure Maintenance CleaningSchedule LubricationService TroubleshootingWiring Wiring Safety InstructionsT23108 Wiring Diagram T23108 wiringBreakdown Diagram PartsParts List DescriptionWarranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents