Grizzly T23108 owner manual How the Chain Cuts

Page 21

How the Chain Cuts

As illustrated in Figure 21 below, when the cutting point at the top of the cutter moves against the wood ("1"), the front of the cutter pivots up until the depth gauge meets the wood ("2"), which forces the cutter to pivot even farther into the wood ("3") to make the cut.

When the rear of the top plate meets the wood ("4"), it forces the cutter to continue pivoting for- ward and move out of the kerf, producing wood chips which are carried away by the top plate angle in the final position ("5") to complete the cut.

The goal of this rocking motion is to allow the chain saw to self-feed into the wood and do the work without requiring the operator to force the chain into the wood. This makes the job easier and reduces wear on the saw and chain.

The depth gauge setting determines how big of a bite the cutter takes ("2–3"). It is imperative that the depth gauge is set below the leading edge of the top plate by the proper amount so that the cutter can move into the wood.

If the depth gauge is too high or too low, it will prevent the cutter from pivoting forward and self- feeding into the wood. Refer to Depth Gauge Setting on Page 28 for additional information.

Also important is the amount of the clearance angle. The downward slope of the top plate enables the cutter to move into the wood ("2") and then forces it out again ("3–4") to complete the cut.

Always use the chain manufacturer's specifica- tions for the cutter specifications when sharpen- ing the chain.

1

2

3

4

5

 

Chain Travel

Figure 21. The rocking self-feeding motion of the cutter link during a cutting operation.

Model T23108 (Mfg. Since 7/10)

-19-

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Chain SAW Sharpener Page Table of Contents Manual Accuracy IntroductionContact Info Machine DescriptionON/OFF IdentificationSafety Instructions for Machinery SafetyUnattended OPERATION. Never­ leave­ Additional Safety for Chain Saw Sharpeners Single-Phase Power SupplyFull-Load Current Rating at Amps Nominal Voltage 110V/120V50 ft Minimum Gauge Size 14 AWGNeeded for Setup SetupUnpacking Description QtyInventory Figure Qty InventorySite Considerations Weight LoadMounting WorkbenchMachine Base Workbench To assemble the sharpener AssemblyTo install the grinding wheel Installing Grinding WheelTo test run the machine Power ConnectionChain Saw Terminology OperationsDrive Link Chain PitchPage How the Chain Cuts Grinding Wheel Selection To perform a ring test Wheel Inspection Ring TestTop Plate Angle To set up the chain holder for the top plate angleTop Plate Cutting Angle To tilt the chain holder for a 10 gullet angle Gullet AngleTo sharpen the chain cutters Sharpening OperationAdvancement guide and controls Depth stop and controls Depth Gauge Setting Clamp Plate AdjustmentTo adjust the clamp plate pressure Cleaning MaintenanceSchedule LubricationTroubleshooting ServiceWiring Safety Instructions WiringT23108 wiring T23108 Wiring DiagramParts Breakdown DiagramDescription Parts ListComments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCWarranty and Returns Warranty and ReturnsOrder Hours a DAY

T23108 specifications

Grizzly T23108 is a powerful and versatile woodworking tool designed to meet the needs of both professional woodworkers and hobbyists alike. As a table saw, it combines precision, safety, and ease-of-use, ensuring that users can execute a variety of cutting tasks with confidence and accuracy.

One of the standout features of the Grizzly T23108 is its robust construction. Built with a sturdy cast iron tabletop, it provides stability and reduces vibrations during operation, ensuring cleaner cuts and enhancing the overall durability of the saw. The table measures a generous size, allowing for larger workpieces to be handled with ease.

The T23108 is equipped with a powerful 2 HP motor that delivers impressive performance, making it suitable for cutting hardwood and other dense materials. The motor is designed to provide consistent power, even under heavy loads, ensuring that users can tackle tough tasks without the tool bogging down.

Safety is a top priority in the design of the Grizzly T23108. It features a high-quality blade guard that protects the user from accidental contact with the saw blade while cutting, and it includes riving knife technology. This feature helps to prevent kickback, a common hazard with table saws, by allowing the blade to remain aligned with the workpiece during cuts. Additionally, the saw boasts an easy-to-use emergency stop switch that can quickly disconnect power in case of an emergency.

Another key technological feature of the Grizzly T23108 is its adjustable fence system. The rip fence is easy to adjust, ensuring that users can achieve precise measurements and straight cuts consistently. The fence locks securely in place, giving users the confidence that their settings will remain accurate throughout the cutting process.

The saw also offers versatility with its capability to perform various cuts, including crosscuts and bevel cuts, thanks to its tilting blade mechanism. This adaptability makes the Grizzly T23108 an excellent choice for a range of woodworking projects, from simple DIY tasks to complex furniture building.

Overall, the Grizzly T23108 is an exceptional table saw that delivers on performance, safety, and versatility. Its superior build quality, powerful motor, and advanced safety features make it a reliable choice for anyone looking to invest in a high-quality woodworking tool. Whether you are a seasoned professional or just starting in woodworking, the Grizzly T23108 can enhance your workshop and help you achieve your crafting goals with efficiency and precision.
Top Page Image Contents