OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS: Cold Engine
1.Position choke control in ON position.
2.Position throttle control at 1/2 speed setting.
3.Insert ignition key and turn to "Start" position.
When engine starts, release ignition key. Key will return to "Run" position.
4. Once engine starts to warm up, slowly move choke control to OFF position.
5. Move throttle control to the FAST position.
6. Engine must be operated with throttle control in the FAST position, or maximum setting to insure adequate lubrication and cooling of the engine, and cut quality of the mower deck.
STARTING INSTRUCTIONS: Engine has been operated.
1.Move throttle control to 1/4 to 1/2 setting.
2.Insert ignition key and turn to "Start" position. When engine starts, release ignition key. Key will return to "Run" position.
3.Move throttle control to FAST position.
NOTE: Model ZTR 5023 may require partial choke setting to start even if the engine has been operated for a period of time.
4.Engine must be operated with throttle control in the FAST position, or maximum setting to insure adequate lubrication and cooling of the engine, and cut quality of the mower deck.
CAUTION DO NOT operate the engine in an enclosed area. The exhaust fumes are toxic.
Page 21