CARE AND MAINTENANCE
BELT TENSION
ENGINE TO MOWER DECK BELT:
42" and 50" | P/N 6111 |
60" | P/N 6938 |
The engine to mower deck drive belts are automatically held in proper tension by springs which push the deck assembly forward and do not require any additional adjustment to be made.
MOWERREAR DECK SERPENTINE BELT:
HANGER
PIN
42" | P/N 6109 |
50" | P/N 1300 |
60" | P/N 6939 |
Refer to illustration for adjustment procedure.
NOTE: Belt deflection or movement should be approximately 1/4" when measured at
Periodically inspect both belt and idler systems.
Page 28