OPERATION INSTRUCTIONS
DECK ROLLERS: | 60" Deck | |||
Purpose: | The spring loaded deck rollers located at the front corners of the 60" mower deck are | |||
| designed as an aid to limit turf scalping when mowing on uneven ground. | |||
Height: | Normal height settings as installed at the factory allows each roller to ride slightly | |||
| above the turf. This setting should prove ideal under most mowing conditions. | |||
Adjustment: | Some mowing applications may require lowering of each front roller. To lower the | |||
| roller, remove the pin, spring, washers and spacer P/N 9789 from the top of roller | |||
| bracket tube. Remove roller bracket from tube. Slide spacer P/N 9789 on roller | |||
| bracket shaft and reassemble using washer, spring and pin at the top. | |||
Lubrication: | The use of a penetrating oil or light grease on the roller bracket shafts will keep roller | |||
| moving freely. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Page 25