Dixon ZTR 5017Twin manual BOX to Hydrostat Belt Adjustment

Page 34

CARE AND MAINTENANCE

Adjustment of the drive system is limited to the actual function of the hydrostatic transmissions as outlined below.

T-BOX TO HYDROSTAT BELT ADJUSTMENT:

Tighten the (2) J-bolts on the T-box mounting plate until each belt has 1/8th to 1/4th of an inch free play or movement at a mid-point between the pulleys on the hydrostats and T-Box.

Each hydrostat has a bypass relief pin located at the rear of the hydrostatic unit. A bypass keeper is provided to allow the mower to be rolled around without engine running. To accomplish this, the bypass keeper springs must be positioned to depress the bypass relief pins. Remove bypass keeper springs prior to actual operation of the mower.

Page 34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents ZTR Mowers Important Read Carefully Index 11-13Safety Safety Alert Symbol Safety SymbolsGeneral Operation Slope Operation Do notChildren Volt Utility OutletService Dixon Limited Warranty Policy Commercial Models Specifications Model ZTRChassis Model ZTR 5017Twin Seat Adjustment Instructions SeriesControls To SET Parking Brake Parking BrakeHYDRO-GEAR Drive System Turning To GO ForwardTo GO Backward BrakingCircuit Breaker Blade DriveMower Deck CUT Height Lift Lever Operation Instructions TowingBlade Drive Switch Test Parking Brake Switch TestSeat Switch Test Starting Instructions Cold Engine Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting SeasonSide Discharge of the Clippings Grass Height SuggestionsDeck Rollers Care and Maintenance Maintenance ScheduleMower Blade Maintenance Belt Tension Engine to Mower Deck BeltLubrication Fuel Shut OFF ValveChassis Locations Rear Wheels Wheel ReversalOIL Fill Changing the Engine OILProtect Your Investment Mower Deck Removal Mower Deck Leveling Procedure BOX to Hydrostat Belt Adjustment Parking Brake Cable Adjustment Neutral Adjustment Forward Travel Speed Adjustment Procedure for Electric Clutch Adjustment AIR GAP AdjustmentHydrostatic Transmission OIL and Filter Service OIL RequirementsHydrostatic Transmission OIL & Filter Service Serial Numbers Warranty PARTS/SERVICE Electrical Systems Cleaning the MowerWheels and Tires Blades Standard Service Parts ListBelts Kohler and Briggs & Stratton AIR and OIL Filter Part Numbers Troubleshooting Mower CUT QualityDrive System Electrical System Owner Information 5000Series 5020,5023&5425 Part No
Top Page Image Contents