Dixon ZTR 5017Twin manual Troubleshooting, Mower CUT Quality

TROUBLESHOOTING

MOWER CUT QUALITY:

There are many variables that can affect the cut quality of any riding mower. Type and conditions of grass, cut height setting, engine RPM and ground speed are some of the variables that interact creating differences in cut quality. Examination of one or more of the above will generally produce a quality cut.

The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.

SITUATION	CAUSES	REMEDY
Poor cut quality	Ground speed	Reduce mowing speed.
Poor cut quality	Incorrect engine to	Refer to page 42 for part numbers.
	mower deck belt
Poor cut quality	Engine RPM too low	Increase engine RPM to maximum.
Poor cut quality	Dull or bent blade	Sharpen or replace as required.
Poor cut quality	Un-level mower deck	Refer to page 33 for deck leveling
		procedure.
Poor cut quality	Grass buildup under	Clean out underside of mower deck.
	mower deck
Poor cut quality	Improper blades	Refer to page 42 for part numbers.
Poor cut quality	Uneven tire pressures	Refer to page 41 for correct tire
		pressures.

Page 44