Dixon ZTR 5017Twin manual Care and Maintenance, Maintenance Schedule

Page 26

CARE AND MAINTENANCE

This portion of the owner's manual deals with normal service items which can be performed by the owner. Please remember that if you are in doubt as to the correct service procedures to be followed, these and other service situations can be handled by a Dixon ZTR dealer who is familiar with the service of your mower.

MAINTENANCE SCHEDULE:

To insure a long and trouble free service life of all components, a regular and thorough maintenance schedule should be followed. The following items should be checked after the first (10) hours of operation and on a weekly basis, or each (40) hours of use:

(Items marked with an asterisk * require more frequent attention)

1.Drive system, belts and controls.

2.Mower deck belts.

3.Tire pressures.

4.Hydro oil tank.

5.Tightness of all nuts and bolts.

6.Battery fluid level.

7.* Engine oil. (Before each use or every 8 hours)

8.Electric blade clutch air gap setting.

CAUTION

Before performing any maintenance, shut off engine, allow to cool.

ENGINE:

BATTERY:

For engine operating and maintenance information, refer to the engine operating and maintenance instructions furnished by the engine manufacturer, supplied with each mower.

Check the fluid in the battery at frequent intervals.

Keep fluid level above the plates in each cell, using distilled water.

OFF-SEASON BATTERY STORAGE:

Identify each cable so cables can be reconnected to correct terminals. Disconnect cables from terminals.

ALWAYS disconnect ground cable first and reconnect last.

Charge battery.

DO NOT remove battery from mower.

Clean top of battery and terminals with baking soda and water.

Page 26

Image 26
Contents ZTR Mowers Important Read Carefully Index 11-13Safety Safety Alert Symbol Safety SymbolsGeneral Operation Slope Operation Do notChildren Volt Utility OutletService Dixon Limited Warranty Policy Commercial Models Specifications Model ZTRChassis Model ZTR 5017Twin Seat Adjustment Instructions SeriesControls HYDRO-GEAR Drive System Parking BrakeTo SET Parking Brake Turning To GO ForwardTo GO Backward BrakingMower Deck CUT Height Lift Lever Blade DriveCircuit Breaker Operation Instructions TowingSeat Switch Test Parking Brake Switch TestBlade Drive Switch Test Starting Instructions Cold Engine Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting SeasonSide Discharge of the Clippings Grass Height SuggestionsDeck Rollers Care and Maintenance Maintenance ScheduleMower Blade Maintenance Belt Tension Engine to Mower Deck BeltChassis Locations Fuel Shut OFF ValveLubrication Rear Wheels Wheel ReversalProtect Your Investment Changing the Engine OILOIL Fill Mower Deck Removal Mower Deck Leveling Procedure BOX to Hydrostat Belt Adjustment Parking Brake Cable Adjustment Neutral Adjustment Forward Travel Speed Adjustment Procedure for Electric Clutch Adjustment AIR GAP AdjustmentHydrostatic Transmission OIL and Filter Service OIL RequirementsHydrostatic Transmission OIL & Filter Service Wheels and Tires Electrical Systems Cleaning the MowerSerial Numbers Warranty PARTS/SERVICE Belts Standard Service Parts ListBlades Kohler and Briggs & Stratton AIR and OIL Filter Part Numbers Troubleshooting Mower CUT QualityDrive System Electrical System Owner Information 5000Series 5020,5023&5425 Part No