
OPERATION
1.Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader equipped with a 48” bucket, external hydraulic system of 7 GPM with engine operating at 2500 RPM and relief setting of 2000 PSI.
| Horsepower Range | ||
| System pressure/flow rate | 2000 PSI/ 7 GPM | |
| Lift Capacity to maximum height | 1253 lbs. | |
| Breakout force at pivot pin | 3060 lbs. | |
| Rollback force at ground line | 2470 lbs. | |
| Total weight with bucket (approx.) | 770 lbs. | |
| Raising time to full height | 4.4 seconds | |
| Lower time | 2.9 seconds | |
| Attachment dump time | 3.5 seconds | |
| Attachment rollback time | 2.5 seconds | |
| Hydraulic system flow | 7 GPM | |
| System pressure at rated flow | 2000 PSI | |
| (A) | Maximum Lift Height at Pivot Pin | 97” | 
| (B) | Maximum Height Under Bucket | 91” | 
| (C) | Clearance with Bucket Dumped | 75” | 
| (D) | Reach at Maximum Height | 27” | 
| (E) | Maximum Dump Angle | 46° | 
| (F) | Reach with Attachment on Ground | 65” | 
| (G) | Attachment Rollback Angle | 25° | 
| (H) | Digging Depth | 4” | 
| (I) | Overall Height in Carry Position | 51” @ kneeplate | 
(Manufacturers estimated specifications and design subject to change without notice.)
| 1945 01/11 | Operation Section  | 
© 2011 Alamo Group Inc.