Chain Oiling, Transporting Pole Saw | Black & Decker NPP2018R

625116-00 NPP2018 Pole 11/12/04 9:11 AM Page 9

	Chain Oiling	6
	• A high quality bar and chain oil or	6
	• A high quality bar and chain oil or
	SAE30 weight motor oil should be used
	for chain and bar lubrication. The use
	of a vegetable based bar and chain oil
	is recommended when pruning trees.
	Mineral oil is not recommended
	because it may harm trees. Never use
	waste oil or very thick oil. These may
	damage your chain saw.

• Lubricate the whole chain evenly before each use as shown in figure 6.

Also lubricate the chain whenever replacing a fully discharged battery with a fully charged one.

Transporting Pole Saw

• Always remove the battery pack from the handle (figure 7) and cover the chain with the 7 scabbard (figure 8) when transporting the

Pole Saw. See page 5 for additional information on transporting the battery.

Assembly

Joining Saw Head Module to 18V Handle Module

WARNING: Sharp moving blade. To prevent accidental operation, insure that battery is disconnected from the handle and that the protective scabbard is in place on the chain before performing the following operations. Failure to do this could result in serious personal injury.

The three modules which make up the 18V Pole Saw are keyed to insure correct assembly. If a module does not smoothly attach to another do not force fit.

Combining the handle module (A) to the saw head module (C) creates a pole saw that is approximately 6 foot in length as shown in figure 9. 9

To attach the handle module to the saw head module:

1. Align the groove on the outside of the coupling end of the handle

	module (A) with the tongue on the
	module (A) with the tongue on the	10
	inside of the coupling end of the saw	10
	head module (C). See figure 10. Push
	the two sections completely together.	Groove
	2. Slide the threaded sleeve (6) figure 11	Groove
	on the saw head module down as far as
	on the saw head module down as far as
	possible and rotate the sleeve clockwise
	possible and rotate the sleeve clockwise	11
	until it stops and completely covers the
	orange threads as shown in figure 12.
	WARNING: Always check to make
	sure that the sleeve is completely
	threaded on and that the orange
	threaded on and that the orange
	threads are no longer visible. Not
	threads are no longer visible. Not	12
	threading the sleeve completely on	12
	threading the sleeve completely on
	could result in the modules becoming
	disconnected creating a hazardous
	condition. Periodically check the
	connections to insure that no orange
	connections to insure that no orange
	threads are visible.

NPP2018R, NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.