Accessories
Replacement chain and bar are available from your nearest Black & Decker service center.
Replacement chain #
The use of accessories not recommended in this manual may be hazardous.
Troubleshooting Section
If your Pole Saw does not operate correctly check the following:
Problem | Possible Cause | Possible Solution | |||
• | Tool will not | • | Battery not | • | Check battery installation. |
| start. |
| installed properly. |
|
|
|
| • | Battery not | • | Check battery charging |
|
|
| charged. |
| requirements. |
|
| • | Pull back on lock | ||
|
|
| actuated. |
| button/actuate trigger. |
|
| • | Pole connections | • | Refer to instruction manual |
|
|
| not properly |
| for pole connections. |
|
|
| tightened. |
|
|
• | Unit will not | • | Battery not | • | Insert battery into charger |
| charge. |
| inserted into |
| until red LED appears. |
|
|
| charger. |
| Charge up to 8 hours if |
|
|
|
|
| battery totally drained. |
|
|
|
|
|
|
• | Bar / chain | • | Chain too tight. | • | Refer to section on |
| overheated. |
|
|
| adjusting chain tension. |
|
| • | Lubrication | • | Refer to sections for chain |
|
|
| needed. |
| oiling application. |
• | Chain is | • | Chain tension set | • Refer to section for chain | |
| loose. |
| incorrectly. |
| tensioning. |
|
|
|
|
| |
• | Poor cut | • | Chain tension set | • Refer to section on | |
| quality. |
| incorrectly. |
| adjusting chain tension. |
|
| • Chain needs |
| Note: Excessive tension | |
|
|
| replacement. |
| leads to excessive wear |
|
|
|
|
| and reduction in life of bar |
|
|
|
|
| & chain. |
Lubricate after every 10 minutes of use.
Refer to section for installation of chain.
13