Black & Decker NPP2018R instruction manual Switch, Auto-Stop Chain Braking System

Page 11

625116-00 NPP2018 Pole 11/12/04 9:11 AM Page 11

Switch

21

Always be sure of your footing and grip the

Pole Saw firmly with both hands with the

 

thumb and fingers encircling the handle.

 

To turn the tool ON pull the lock button (1)

 

back with your thumb and then squeeze

 

the trigger (2) with your fingers as shown

 

in figure 21. (Once the tool is running you

 

can release the lock button.) To turn the

 

tool OFF, release the trigger.

 

 

Auto-Stop Chain Braking System

Your chain saw is fitted with an auto-stop chain braking system which will stop the chain quickly each time you release the rear trigger, or if kickback should occur. This system should be tested before every use.

 

Pole Saw Trimming /

 

Pruning

 

Warnings:

 

• Never stand directly

 

under the limb you

 

are cutting. Always

Operating Position

position yourself out of

the path of falling

Always Wear:

debris.

• Always wear head,

Head Protection

eye, foot and body

Eye Protection

protection. Wearing

body protection helps

 

 

reduce the risk of

 

injury when operating

 

this unit.

Work Gloves

• Never

 

stand on a

 

ladder or

Long Pants

other

 

unstable

 

support

Steel Toed Shoes

while using the Pole

Saw. Always avoid

 

 

any position which can

cause you to loose your balance and cause severe injury.

• Keep other persons at least 50 feet (15m) from the work area. Distractions can cause you to lose control.

• Electrocution Hazard. To prevent shock, do not operate within 50 feet (15m) of overhead electrical lines. Always check surrounding area for hidden electrical lines.

•Do not extend Pole Saw switch handle above shoulder height.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents NPP2018 Cordless Pole Saw Keep all parts of your body away from any moving part While Operating Pole SawDo not operate Pole Saw Service General Safety RulesSpecific Safety Rules Kickback Safety FeaturesSafety Warnings and Instructions Charging Battery Cap InformationImportant Charging Notes Charging the BatteryAn engine generator or DC power Source. Use only 120V AC Operation of the switch until manually actuated Replacement Saw Chain a chain that complies with kickbackRequirements when used with other saws Electrical power circuit to the motor of the chain sawAfter being pulled 1/8 3mm away Installing and Removing Saw ChainAdjusting Chain Tension With the saw still on a firm surfaceJoining Saw Head Module to 18V Handle Module Chain OilingTransporting Pole Saw Was attached Connecting the BatteryDetaching Saw Head Module Module or three module mode, always detachAuto-Stop Chain Braking System SwitchSplinter figure Pruning With the Pole SawSaw chain sharpness Saw chain tensionProblem Possible Cause Possible Solution AccessoriesTroubleshooting Section Unit runs but Chain installed Troubleshooting Section Con’tService Information Full Two-Year Home Use WarrantyAvant toute utilisation de la scie à long manche Guide D’UTILISATIONRègles de sécurité Généralités Pendant l’utilisation de la scie à long mancheNe pas utiliser la scie à long manche Ne pas effectuer de coupes en plongée ou rase EntretienDispositif de protection contre les rebonds Dispositifs de sécurité anti-rebondsConsignes de sécurité particulières Directives et consignes de sécurité Chargement Information concernant le capuchon du bloc-piles45.7 Recharger la pileLongueur totale de La rallonge en mètres Glossaire terminologique de la scie à long manche Blessure grave Installation et retrait de la chaîne coupanteCaractéristiques Préparation de la scie à long manche pour son utilisation’information sur comment transporter La pile Réglage de la tension de la chaîneTransport de la scie à long manche AssemblageVers la droite à fond jusqu’à ce qu’il Démontage Pour détacher le module de tête de scieOrange comme illustré en Figure Du module central B. Se reporter enSystème de freinage d’arrêt automatique Utilisation de la scie à long mancheBranchement de la pile InterrupteurÉbranchage avec la scie à long manche Avec la scie à longManche Tension de la chaîne coupante AccessoiresEntretien de la scie à long manche Affûtage de la chaîne coupanteGuide de dépannage Information sur les servicesCause probable Solution possible Problème Cause probable Solution possibleGarantie complète de deux ans pour usage résidentiel Manual DE Instrucciones Reglas de seguridad generales Al operar la garrocha podadoraNo opere la garrocha podadora Características de seguridad contra rebote ServicioProtector contra rebote Conserve Estas Instrucciones Normas específicas de seguridadAdvertencias e instrucciones de seguridad Carga Información sobre el protector de la batería38,1 Cómo cargar la bateríaNotas importantes sobre la carga Largo total del alargador En metrosNombres y terminología para la garrocha podadora Preparación para el uso de su garrocha podadora CaracterísticasInstalación y desmantelamiento de la cadena de la sierra Con carga completa Ajuste de la tensión de la cadenaAceitado de la cadena Cuando la cadena se retraeCon el saliente de la parte interna del Causar lesiones corporales gravesLa sierra Alinee la hendidura que se encuentra En la parte externa del extremo deSistema de detención automático de la cadena Desmantelamiento Separación del módulo de la sierraOperación de la garrocha podadora ConmutadorPara podar con la garrocha podadora Poda con laAccesorios Filo de la cadena de la sierraTensión de la cadena de la sierra Sección de mantenimiento de la garrocha podadoraProblema Causa posible Posible solución Sección de resolución de problemasEpecificaciones NPP2018 Información de servicio
Related manuals
Manual 48 pages 47.71 Kb

NPP2018R, NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents