Black & Decker NPP2018R Detaching Saw Head Module, Connecting the Battery, Was attached

Page 10

625116-00 NPP2018 Pole 11/12/04 9:11 AM Page 10

Joining Center Extension to Saw Head Module and Handle Module

Adding the extension (B) to the handle module (A) and saw head module (C) creates a Pole Saw that is approximately 9 foot in length as shown in figure 13.

13

To attach the middle module to the handle module and saw head module:

1. Align the groove on the outside of the

14

coupling end of the handle module (A)

 

with the tongue on the inside of the

 

coupling end of the center extension (B). Groove

See figure 14. Push the two sections

 

 

completely together.

 

15

2. Slide the threaded sleeve (6) (figure

 

15) on the center extension down as far

 

as possible and rotate the sleeve

 

clockwise until it stops and completely

 

covers the orange threads as shown in

 

 

figure 16.

 

16

3.Repeat steps 1 and 2 above to attach the saw head module to the center extension.

WARNING: Always check to make sure that the sleeve is completely

threaded on and that the orange threads are no longer visible. Not threading the sleeve completely on could result in the modules becoming disconnected creating a hazardous condition.

Periodically check the connections to insure that no orange threads are visible.

10

Disassembly

Detaching Saw Head Module

WARNING: Sharp moving blade. To prevent accidental operation, insure that battery is disconnected from the handle and that the protective scabbard is in place on the chain before performing the following operations. Failure to do this could result in serious personal injury.

When detaching the modules, whether it is in the two

 

17

module or three module mode, always detach the

saw head module first. To do this, rest the handle

 

module on the ground and grasp the center of the

 

saw head module with

 

 

 

 

one hand figure 17. Use

18

 

 

 

your other hand to loosen

 

 

 

 

the threaded sleeve

 

 

 

 

figure 18 and then pull

 

 

 

 

the two halves apart.

 

 

 

 

Repeat this process if the

center extension

 

 

 

 

 

 

was attached.

19

 

 

Operating the Pole Saw

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

Connecting the Battery

Place the battery in the tool as shown in 20 figure 19 and be certain that it is inserted

fully into the tool cavity until it “clicks” into place. To remove the battery from the tool, press down on the release button on the back of the battery (figure 20) and slide

out.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents NPP2018 Cordless Pole Saw Do not operate Pole Saw While Operating Pole SawKeep all parts of your body away from any moving part General Safety Rules ServiceKickback Safety Features Specific Safety RulesBattery Cap Information Safety Warnings and Instructions ChargingAn engine generator or DC power Source. Use only 120V AC Charging the BatteryImportant Charging Notes Electrical power circuit to the motor of the chain saw Replacement Saw Chain a chain that complies with kickbackRequirements when used with other saws Operation of the switch until manually actuatedWith the saw still on a firm surface Installing and Removing Saw ChainAdjusting Chain Tension After being pulled 1/8 3mm awayTransporting Pole Saw Chain OilingJoining Saw Head Module to 18V Handle Module Module or three module mode, always detach Connecting the BatteryDetaching Saw Head Module Was attachedSwitch Auto-Stop Chain Braking SystemSaw chain tension Pruning With the Pole SawSaw chain sharpness Splinter figureTroubleshooting Section AccessoriesProblem Possible Cause Possible Solution Full Two-Year Home Use Warranty Troubleshooting Section Con’tService Information Unit runs but Chain installedGuide D’UTILISATION Avant toute utilisation de la scie à long mancheNe pas utiliser la scie à long manche Pendant l’utilisation de la scie à long mancheRègles de sécurité Généralités Dispositifs de sécurité anti-rebonds EntretienDispositif de protection contre les rebonds Ne pas effectuer de coupes en plongée ou raseConsignes de sécurité particulières Information concernant le capuchon du bloc-piles Directives et consignes de sécurité ChargementLongueur totale de La rallonge en mètres Recharger la pile45.7 Glossaire terminologique de la scie à long manche Préparation de la scie à long manche pour son utilisation Installation et retrait de la chaîne coupanteCaractéristiques Blessure graveAssemblage Réglage de la tension de la chaîneTransport de la scie à long manche ’information sur comment transporter La pileDu module central B. Se reporter en Démontage Pour détacher le module de tête de scieOrange comme illustré en Figure Vers la droite à fond jusqu’à ce qu’ilInterrupteur Utilisation de la scie à long mancheBranchement de la pile Système de freinage d’arrêt automatiqueManche Avec la scie à longÉbranchage avec la scie à long manche Affûtage de la chaîne coupante AccessoiresEntretien de la scie à long manche Tension de la chaîne coupanteProblème Cause probable Solution possible Information sur les servicesCause probable Solution possible Guide de dépannageGarantie complète de deux ans pour usage résidentiel Manual DE Instrucciones No opere la garrocha podadora Al operar la garrocha podadoraReglas de seguridad generales Protector contra rebote ServicioCaracterísticas de seguridad contra rebote Normas específicas de seguridad Conserve Estas InstruccionesInformación sobre el protector de la batería Advertencias e instrucciones de seguridad CargaLargo total del alargador En metros Cómo cargar la bateríaNotas importantes sobre la carga 38,1Nombres y terminología para la garrocha podadora Instalación y desmantelamiento de la cadena de la sierra CaracterísticasPreparación para el uso de su garrocha podadora Cuando la cadena se retrae Ajuste de la tensión de la cadenaAceitado de la cadena Con carga completaEn la parte externa del extremo de Causar lesiones corporales gravesLa sierra Alinee la hendidura que se encuentra Con el saliente de la parte interna delConmutador Desmantelamiento Separación del módulo de la sierraOperación de la garrocha podadora Sistema de detención automático de la cadenaPoda con la Para podar con la garrocha podadoraSección de mantenimiento de la garrocha podadora Filo de la cadena de la sierraTensión de la cadena de la sierra AccesoriosSección de resolución de problemas Problema Causa posible Posible soluciónInformación de servicio Epecificaciones NPP2018
Related manuals
Manual 48 pages 47.71 Kb

NPP2018R, NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents