Black & Decker CS1015 instruction manual Wrench storage, Maintenance, Lubrication, Accessories

Page 9

blade guard to an upward position. Lower rear of foot plate until blade teeth almost touch cutting line.

• Release the blade guard (its contact with the work will keep it in position to open freely as you start the cut). Remove hand from guard lever and firmly grip secondary handle (3), as shown in figure 11. Position your body and arm to allow you to resist kickback if it occurs.

• Make sure blade is not in contact with cutting surface before starting saw.

• Start the motor and gradually lower the saw until its foot plate rests flat on the material to be cut. Advance saw along the cutting line until cut is completed as shown in figure 11.

• Release trigger and allow blade to stop completely before withdrawing the blade from

the material.

• When starting each new cut, repeat as above.

11

wrench storage (fig.12)

The spanner wrench (8) can be stored on the saw shoe as shown in figure 12.

12

8

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Lubrication

Black & Decker tools are properly lubricated at the factory and are ready for use.

Accessories

Rip fences and other accessories are available from Black and Decker Service Centers. To find your local service location, call: 1-800-544-6986 or visit

www.blackanddecker.com Recommended accessories for use with your tool are available from your local retailer.

WARNING:The use of any accessory not recommended for use with this tool could be hazardous. Use only 7-1/4 “ (184mm) blades with 5/8” diameter arbor.

Service Information

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, call: 1-800-544-6986 or visit www. blackanddecker.com

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Save this manual for future reference 4 184mm, 15 AMP Circular SawGeneral safety rules Safety Guidelines DefinitionsCauses and operator Prevention of kickback Safety instructionS for all sawsLower guard safety instructions Additional safEty instructionsDefinitions are as follows Earthing terminal Safety alert symbolVolts MilliwattsAlways secure work to prevent workpiece movement during cut Keep blades sharp and cleanMotor Intended USEAdjusting the depth of cut Assembly / adjustment set-pAdjusting the bevel angle fig Overview figSwitch OperationGuard Against Kickback Accessories MaintenanceService Information Full Two-Year Home Use Warranty Wrench storageProblem Possible Cause Possible Solution Pour obtenir des réponses instantanément 24 heures par jour Merci d’avoir choisi Black & DeckerRègles Générales DE Sécurité Sécurité personnelle ConsignesdeRÈGLESDESÉCURITÉ Pourtouteslesscies Causes de l’effet de Rebond et preévention Par L’opérateurLes performances et la sécurité de fonctionnement Directives de Sécurité Supplémentaires scies Circulaires Directives de Sécurité concernant le protége- lame inférieurProtégez-vous des effets De rebound Pour Réduire LE Risque ’EFFET DE RebondSerrer fermement la scie avec les deux mains en tout temps Utilisation Prévue MoteurAperçu Général fig Configuration de ’assemblage et des RéglagesDécoupes Générales Important PROTÉGEZ-VOUS DES Effets DE RebondInterrupteur FonctionnementInformation sur les réparations Problème Cause possible Solution possible Gracias por elegir Black & Decker Conserve este manual para futuras consultasNormas Generales DE Seguridad Uso y mantenimiento de la herramienta eléctrica Instruccionesdeseguridad ParatodaslassierrasCon ambas manos, no hay riesgo de que la hoja las corte Causas del retroceso y su prevención por parte del operadorAdicionales De Seguridad Instrucciones De Seguridad para El Protector inferiorEvite el contacto durante tiempo Manténgase alerta y en controlMantenga las hojas afiladas y limpias USO Previsto Ensamblado/Ajuste Descripción general figInterruptor FuncionamientoGarantía completa de dos años para uso en el hogar Problema Causa posible Solución posibleGUADALAJARA, JAL CULIACAN, SIN MONTERREY, N.L TORREON, CoahVERACRUZ, VER PUEBLA, PUE
Related manuals
Manual 32 pages 31.3 Kb

CS1015 specifications

The Black & Decker CS1015 is a versatile and powerful electric chainsaw designed for both professional and home users. It is recognized for its efficiency, ease of use, and robust performance, making it an ideal tool for cutting through branches, logs, and other types of wood with minimal effort.

One of the standout features of the CS1015 is its 10-inch cutting bar, which is optimized for maneuverability and control. This size is perfect for tackling light to medium-duty tasks, such as trimming trees, clearing fallen branches, or doing yard work. With a powerful 10 amp motor, the chainsaw delivers a high level of performance that allows users to make quick and clean cuts through tough materials.

Safety is a key consideration in the design of the CS1015. It is equipped with a robust safety brake that stops the chain in less than a second if the saw kicks back, providing peace of mind for users who may be new to chainsaw operation. Additionally, the tool features a two-handed grip design that enhances stability and control during operation, reducing the risk of accidents.

The CS1015 also incorporates a tool-free chain tensioning system, making it easier to adjust the chain for optimal performance without needing additional tools. This feature is particularly valuable for users who frequently need to change or adjust the chain during work. Furthermore, the automatic oiler ensures that the chain is adequately lubricated during use, enhancing its longevity and reducing wear.

In terms of weight, the CS1015 is lightweight and easy to handle, allowing users to maneuver it comfortably for extended periods. The electric motor eliminates the need for gasoline, providing a cleaner solution with lower emissions and reduced noise levels compared to gas-powered alternatives. This eco-friendly aspect makes it a great choice for residential areas or any location where noise and fumes could be a concern.

In conclusion, the Black & Decker CS1015 is an impressive electric chainsaw that combines power, safety features, and user-friendly design. It is well-suited for various outdoor tasks while being lightweight and low-maintenance. Whether it's for small projects around the home or more demanding tasks, the CS1015 provides efficiency and reliability that users can depend on.
Top Page Image Contents