Blount manual Operation 633GC OPERATOR’S Manual, Fuel Handling, Fuel Mixing, Fueling

Page 12

OPERATION

633GC OPERATOR’S MANUAL

 

 

FUEL HANDLING

CAUTION

FUEL MIXTURE: 25:1 gasoline/oil mixture.

GASOLINE

OIL

 

 

US

US

Gallon

Fl oz

 

 

1

5.2

 

 

2 1/2

12.8

 

 

5

25.6

GASOLINE

OIL

 

 

Liters

ml

1

40

 

 

5

200

 

 

10

400

20

800

 

 

•Use premium unleaded gasoline with a minimum octane rating of 90. If lower octane gasoline is used, engine temperature will increase which can result in a piston seizure and damage to the engine.

•Always provide adequate ventilation when handling fuel.

•Use caution when handling gasoline. Avoid direct contact with skin or inhaling fuel vapor.

FUEL MIXING

•Always mix gasoline and oil in a clean container intended for use with fuel.

•Keep fuel container closed tightly to prevent moisture from getting into the fuel.

•Always begin mixing fuel by adding half the amount of gasoline to be used. Then add the correct amount of two-stroke oil for 25:1 mixture and finish filling the container with gasoline.

•Do not mix more than one month’s supply of fuel. This helps prevent the separation of the two-stroke oil from the gasoline (varnishing).

•If the saw is not used for an extended period of time (3 months) the fuel tank should be emptied and cleaned.

FUELING

•Always shut off the saw before fueling.

•Before fueling, clean the area around fuel cap to prevent dirt from contaminating the fuel. Contamination of the fuel tank can lead to saw malfunction.

•Thoroughly mix the fuel in it’s container before fueling.

•Slowly open the fuel cap to release any pressure that may have built-up in the tank.

•After adding fuel, tighten the fuel cap carefully and secure with a wrench.

12

© 2007 ICS, Blount Inc.

P/N 70944 Jan 07

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 633GC Page 633GC OPERATOR’S Manualtable of Contents Symbols & Labels 633GC OPERATOR’S Manual Safety Following Symbol Applies to ALL the Items Listed on this633GC OPERATOR’S Manual Safety 633GC OPERATOR’S Manual Following Symbol Applies to ALL Items Listed on thisGeneral Safety Precautions Engine BREAK-IN Technical Specifications 633GC OPERATOR’S Manual Guide BAR and Diamond Chain Installation SET-UPSET-UP 633GC OPERATOR’S Manual SET-UP Operation 633GC OPERATOR’S Manual Fuel HandlingFuel Mixing FuelingOperation Starting and Stopping a Diamond ChainsawPRE-CUT Checklist Planning the CUTCutting with the 633GC Cutting TipsSystem CLEAN-UP Maintenance After Each USEAfter 10 Hours of USE After 40 Hours of USEMaintenance 633GC OPERATOR’S Manual Starter Housing AssemblyAIR Filter Starter Rope Replacement Tensioning the Recoil SpringChain Tensioner Drive Sprocket Drive Sprocket RemovalDrive Sprocket Installation Spark PlugCarburetor Guide BarsMaintenance 633GC OPERATOR’S Manual 633GCTROUBLESHOOTINGPERATOR’S Manual Troubleshooting Further questions? Call 1-800-321-1240 or633GC OPERATOR’SREFERENCEMANUAL Approximate Cutting Rates INCH-FOOT DefinitionPage 633GC OPERATOR’S Manual

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents