Blount 633GC manual Engine BREAK-IN

Page 7

633GC OPERATOR’S MANUAL

SAFETY

THE FOLLOWING SYMBOL APPLIES TO ALL ITEMS LISTED ON THIS PAGE

IMPORTANT

A potential situation exists which, if not avoided, may result in product or property damage.

Note: The diamond chainsaw is equipped with a two-stroke engine and must always be run using a mixture of gasoline and ICS® two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

•This engine is designed to be operated on premium unleaded gasoline.

•Use high quality, unleaded gasoline with a minimum octane rating of 90. If lower octane gasoline is used, engine temperature will increase which will result in a piston seizure and damage to the engine.

•Fuel mixture: 25:1 gasoline/oil mixture. Incorrect fuel mixture is the number one cause of piston seizure.

•Use ICS® brand two-stroke engine oil, or other high quality 2-stroke oil that has been formulated for air cooled power equipment.

•Never use two-stroke oil formulated for water-cooled two-cycle engines, such as outboard motor oil.

•Never use motor oil intended for four-stroke engines.

ENGINE BREAK-IN

•It is very important to break-in a new engine to “seat” all moving parts, especially the piston rings.

•To break-in the engine, run one full tank of 25:1 fuel at idle, cycling the throttle every 5 to 10 minutes to prevent loading.

•Failure to break-in an engine may result in piston seizure.

P/N 70944 Jan 07

© 2007 ICS, Blount Inc.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 633GC Page 633GC OPERATOR’S Manualtable of Contents Symbols & Labels 633GC OPERATOR’S Manual Following Symbol Applies to ALL the Items Listed on this Safety633GC OPERATOR’S Manual Following Symbol Applies to ALL Items Listed on this Safety 633GC OPERATOR’S ManualGeneral Safety Precautions Engine BREAK-IN Technical Specifications 633GC OPERATOR’S Manual SET-UP Guide BAR and Diamond Chain InstallationSET-UP 633GC OPERATOR’S Manual SET-UP Fueling Operation 633GC OPERATOR’S ManualFuel Handling Fuel MixingStarting and Stopping a Diamond Chainsaw OperationPlanning the CUT PRE-CUT ChecklistCutting Tips Cutting with the 633GCSystem CLEAN-UP After 40 Hours of USE MaintenanceAfter Each USE After 10 Hours of USEStarter Housing Assembly Maintenance 633GC OPERATOR’S ManualAIR Filter Tensioning the Recoil Spring Starter Rope ReplacementChain Tensioner Drive Sprocket Removal Drive SprocketSpark Plug Drive Sprocket InstallationGuide Bars CarburetorMaintenance 633GC OPERATOR’S Manual Further questions? Call 1-800-321-1240 or 633GCTROUBLESHOOTINGPERATOR’S Manual TroubleshootingINCH-FOOT Definition 633GC OPERATOR’SREFERENCEMANUAL Approximate Cutting RatesPage 633GC OPERATOR’S Manual

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents