Blount Safety 633GC OPERATOR’S Manual, Following Symbol Applies to ALL Items Listed on this

Page 6

SAFETY

633GC OPERATOR’S MANUAL

 

 

THE FOLLOWING SYMBOL APPLIES TO ALL ITEMS LISTED ON THIS PAGE

CAUTION

A potentially hazardous situation exists which, if not avoided, may result in minor or moderate injury or property damage.

•Always turn a diamond chainsaw OFF when performing maintenance on the saw including chain tensioning.

•Never use equipment that is not functioning properly. Have the saw repaired by qualified service personnel.

•Turn engine OFF before refueling. Keep away from open flame. Always provide adequate ventilation when handling fuel. Move diamond chainsaw at least 10 feet (3 m) away from refueling area before starting.

•SealPro® diamond chains require a minimum water pressure of 20 psi (1.4 bar). Insufficient water supply may result in excessive wear to the chain, which can lead to loss of strength and chain breakage.

•Never start a diamond chainsaw unless the bar, chain and side cover are properly installed.

GENERAL SAFETY PRECAUTIONS

•Always wear protective clothing, including hard hat, eye protection, hearing protection, and gloves.

•Avoid loose fitting clothing.

•Perform safety checks before starting each day.

•Always operate tool with solid footing and with both hands on saw.

•Remove or control slurry to prevent slippery conditions while cutting.

•Be sure there are no obstructions (plumbing, electrical conduit, air ducts) and no unnecessary people present.

•Set up a well-marked safety zone with a roped boundary and clear signs.

•Provide adequate ventilation when working in an enclosed area. Breathing exhaust gases is dangerous.

•To avoid electrocution, check for live electrical wiring near cutting area.



© 2007 ICS, Blount Inc.

P/N 70944 Jan 07

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 633GC Page 633GC OPERATOR’S Manualtable of Contents Symbols & Labels 633GC OPERATOR’S Manual Safety Following Symbol Applies to ALL the Items Listed on this633GC OPERATOR’S Manual Safety 633GC OPERATOR’S Manual Following Symbol Applies to ALL Items Listed on thisGeneral Safety Precautions Engine BREAK-IN Technical Specifications 633GC OPERATOR’S Manual Guide BAR and Diamond Chain Installation SET-UPSET-UP 633GC OPERATOR’S Manual SET-UP Fuel Mixing Operation 633GC OPERATOR’S ManualFuel Handling FuelingOperation Starting and Stopping a Diamond ChainsawPRE-CUT Checklist Planning the CUTCutting with the 633GC Cutting TipsSystem CLEAN-UP After 10 Hours of USE MaintenanceAfter Each USE After 40 Hours of USEMaintenance 633GC OPERATOR’S Manual Starter Housing AssemblyAIR Filter Starter Rope Replacement Tensioning the Recoil SpringChain Tensioner Drive Sprocket Drive Sprocket RemovalDrive Sprocket Installation Spark PlugCarburetor Guide BarsMaintenance 633GC OPERATOR’S Manual 633GCTROUBLESHOOTINGPERATOR’S Manual Troubleshooting Further questions? Call 1-800-321-1240 or633GC OPERATOR’SREFERENCEMANUAL Approximate Cutting Rates INCH-FOOT DefinitionPage 633GC OPERATOR’S Manual

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents