Blount 633GC manual Maintenance, After Each USE, After 10 Hours of USE, After 40 Hours of USE

Page 17

633GC OPERATOR’S MANUAL

MAINTENANCE

Follow these simple maintenance guidelines

and the 633GC Concrete Cutting Saw will keep running at its very best.

AFTER EACH USE

1.Rinse the saw, guide bar and diamond chain with water.

2.Follow instructions on the Daily Maintenance Label, located on the air filter cover.

3.Inspect and tighten all fasteners as necessary.

4.Inspect drive sprocket for tooth wear and replace if tooth tips are pointed.

5.Inspect the starter cord. Replace if frayed.

6.Clean air filter. Inspect the air filter for holes. Replace as necessary.

7.Spray saw, guide bar, and chain with lightweight oil.

8.Grease the chain tensioner.

AFTER 10 HOURS OF USE

1.Remove the starter cover and lubricate the starter recoil spring. Clean the flywheel fins and the starter pawls with a wire brush, then grease the starter pawls.

2.Remove the spark plug and clean with a wire brush. Check the electrode gap. The correct gap is 0.020 inches (0.5mm).

AFTER 40 HOURS OF USE

1.Change the spark plug. Adjust the electrode to 0.020 inches (0.5mm).

2.Check the fuel filter located inside the fuel tank. Clean or replace if clogged

P/N 70944 Jan 07

© 2007 ICS, Blount Inc.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 633GC Page 633GC OPERATOR’S Manualtable of Contents Symbols & Labels 633GC OPERATOR’S Manual 633GC OPERATOR’S Manual SafetyFollowing Symbol Applies to ALL the Items Listed on this General Safety Precautions Safety 633GC OPERATOR’S ManualFollowing Symbol Applies to ALL Items Listed on this Engine BREAK-IN Technical Specifications 633GC OPERATOR’S Manual SET-UP Guide BAR and Diamond Chain InstallationSET-UP 633GC OPERATOR’S Manual SET-UP Fuel Handling Operation 633GC OPERATOR’S ManualFuel Mixing FuelingStarting and Stopping a Diamond Chainsaw OperationPlanning the CUT PRE-CUT ChecklistCutting Tips Cutting with the 633GCSystem CLEAN-UP After Each USE MaintenanceAfter 10 Hours of USE After 40 Hours of USEAIR Filter Maintenance 633GC OPERATOR’S ManualStarter Housing Assembly Tensioning the Recoil Spring Starter Rope ReplacementChain Tensioner Drive Sprocket Removal Drive SprocketSpark Plug Drive Sprocket InstallationGuide Bars CarburetorMaintenance 633GC OPERATOR’S Manual Further questions? Call 1-800-321-1240 or 633GCTROUBLESHOOTINGPERATOR’S Manual TroubleshootingINCH-FOOT Definition 633GC OPERATOR’SREFERENCEMANUAL Approximate Cutting RatesPage 633GC OPERATOR’S Manual

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents