Blount 633GC manual Chain Tensioner

Page 20

MAINTENANCE

633GC OPERATOR’S MANUAL

 

 

STARTER HOUSING ASSEMBLY

•To reattach the starter housing, first pull the starter cord out,

then hold the starter housing against the crankcase (Figure 1). Slowly release the starter cord to enable the pulley to fit between the pawls.

• Insert and tighten the screws. Use blue Loctite® #242.

Figure 1

CHAIN TENSIONER

IMPORTANT

The chain tensioner (Figure 2) can become clogged with concrete slurry during cutting. After each use thoroughly flush the chain tensioner with water and apply a liberal amount of grease.

Most Common Causes of Tensioner Damage:

•Side cover nuts are not tight enough. Side cover nuts should be torqued to 20 ft-lbs (27Nm).

•Chain tensioning is attempted without loosening the side cover nuts.

•Concrete debris in tensioner pocket.

Chain

Tensioner

Figure 2

20

© 2007 ICS, Blount Inc.

P/N 70944 Jan 07

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 633GC Page 633GC OPERATOR’S Manualtable of Contents Symbols & Labels 633GC OPERATOR’S Manual 633GC OPERATOR’S Manual SafetyFollowing Symbol Applies to ALL the Items Listed on this General Safety Precautions Safety 633GC OPERATOR’S ManualFollowing Symbol Applies to ALL Items Listed on this Engine BREAK-IN Technical Specifications 633GC OPERATOR’S Manual Guide BAR and Diamond Chain Installation SET-UPSET-UP 633GC OPERATOR’S Manual SET-UP Operation 633GC OPERATOR’S Manual Fuel HandlingFuel Mixing FuelingOperation Starting and Stopping a Diamond ChainsawPRE-CUT Checklist Planning the CUTCutting with the 633GC Cutting TipsSystem CLEAN-UP Maintenance After Each USEAfter 10 Hours of USE After 40 Hours of USEAIR Filter Maintenance 633GC OPERATOR’S ManualStarter Housing Assembly Starter Rope Replacement Tensioning the Recoil SpringChain Tensioner Drive Sprocket Drive Sprocket RemovalDrive Sprocket Installation Spark PlugCarburetor Guide BarsMaintenance 633GC OPERATOR’S Manual 633GCTROUBLESHOOTINGPERATOR’S Manual Troubleshooting Further questions? Call 1-800-321-1240 or633GC OPERATOR’SREFERENCEMANUAL Approximate Cutting Rates INCH-FOOT DefinitionPage 633GC OPERATOR’S Manual

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents