Meridian Audio FPP-61HD20 Advanced OSM Settings Menu, Setting the menu mode, Repeat Timer

Page 44

REPEAT TIMER

Use this to set two timers. Each timer can use the DIVIDER, SOURCE and WORK TIME functions.

Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.

Example:

TIMER1...VIDEO1 will be displayed for 3 minutes. TIMER2...RGB1 will be displayed for 6 minutes in a

2⋅2 video wall.

Perform Steps 1-2 of VIDEO WALL, then...

3. Use the ▲ and ▼ buttons to select “REPEAT TIMER”.

		VIDEO WALL
DIVIDER		:	1
POSITION
DISP. MODE		:	SPLIT
AUTO ID		:	OFF
IMAGE ADJUST
P. ON DELAY		:	OFF
PLE LINK		:	OFF
REPEAT TIMER		:	OFF
	SEL.	ADJ.	EXIT	RETURN

4.Use the and buttons to select “ON”, then press the MENU/ENTER button.

The “REPEAT TIMER” screen appears.

5.Adust using the ▲▼ and buttons.

The mode switches as follows each time the or button is pressed:

		REPEAT TIMER
1	DIVIDER	:	1
	SOURCE	:	VIDEO1
	WORK TIME	:	00H03M
2	DIVIDER	:	4
	SOURCE	:	RGB1
	WORK TIME	:	00H06M
	SEL.	ADJ.		RETURN
	SEL.	ADJ.	EXIT	RETURN

• DIVIDER

Α1 Χ 4 Χ 9 ≅

•SOURCE

The available sources depend on the setting of “BNC INPUT”.

ΑVIDEO1 Χ VIDEO2 Χ VIDEO3 Χ HD/DVD1 ≅

ΑRGB3 Χ RGB2 Χ RGB1 Χ HD/DVD2 ≅

• WORK TIME

Α00H01M Χ 00H02M Χ 00H03M Χ ..... Χ 04H14M Χ 04H15M ≅

Information

REPEAT TIMER settings

If you set both timers, Timer 1 and Timer 2 run consecutively.

In the case of the Video wall, timer No.1 can be used to control all the displays simultaneously.

*This becomes effective when the on-screen menu goes out.

Advanced OSM Settings Menu

Setting the menu mode

This allows you to access full menu items.

When P. ON DELAY or PLE LINK is ON, this won’t be turned OFF.

Example: Setting “ON”

1. On the MAIN MENU, select “ADVANCED OSM”.

		MAIN MENU				1 / 2
PICTURE
AUDIO
IMAGE ADJUST
OPTION1
ADVANCED OSM					:	OFF
ADVANCED OSM					:	OFF
	NEXT PAGE
	SEL.	ADJ.				EXIT	EXIT

2.To set the ADVANCED OSM to “ON”...

Use the and buttons to select “ON”.

The mode switches as follows each time the or button is pressed:

OFF Χ ON

		MAIN MENU			1 / 2
PICTURE
AUDIO
IMAGE ADJUST
OPTION1
OPTION2
OPTION3
ADVANCED OSM				:	ON
	NEXT PAGE
	SEL.	ADJ.			EXIT	EXIT

Information

ADVANCED OSM settings

ON ...... All of the main menu items are available for

advanced users.

OFF .... Some of the main menu items are not available

(e.g. OPTION2, OPTION3).

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

38

Image 44

Contents Digital Cinema Series Risk of Electric Shock Do not Open PrecautionsImportant Information Use only with120V50/60HzAC power Plasma monitor cleaning procedureTo avoid damage and prolong operating life Recommendations to avoid or minimize phosphor burn-inMises en garde et précautions de sécurité Recommandations importantesPrécautions Méthode de nettoyage du moniteur à plasma Contents How to Attach Options to the Plasma Monitor Ventilation Requirements for enclosure mountingTurns the monitor’s power on and off Receives the signals from the remote controlPart Names and Function Front ViewRear View/ Terminal Board RGB2Remote Control Battery Installation and Replacement Transmits the remote control signalsNot functional for the models covered in this manual Clears the number set by the ID Select buttonOperating Range Using the wired remote control modeHandling the remote control Installation Connections Pin Assignments and Signal Levels for 15 pin RGB Analog Signal AnalogBasic Operations To set the off timer To cancel the off timerAfter the power is turned off with the off timer To check the remaining timeWhen viewing videos or digital video discs Wide OperationsWide Screen Operation with Computer Signals When Picture Size is set to OFF Supported resolution Picture Size setting Advanced menu mode Menu OperationsReset Menu TreeOPTION2 PWR. MGT Picture Settings Menu Adjusting the picture Picture adjustment screen Adjusting for the video processorReducing noise in the picture Setting the color temperatureAdjusting the color to the desired level Making the Low Tone adjustments Adjusting the white balance Gamma settings LOW Tone settingsAudio Settings Menu Adjusting the colors Color Tune settings Audio settings menuImage Adjust Settings Menu Setting the allocation of the audio connectorsAdjusting the Position, Size, Fine Picture, Picture Adj Example Setting Audio INPUT1 to VideoOption1 Settings Menu Setting the on-screen menuSetting the BNC connectors Checking the signal being transmitted to RGB1 terminalSetting a computer image to the correct RGB select screen OSM Orbiter settingsSetting high definition images to the suitable screen size Setting the Input Skip Input Skip settings RGB Select modesSetting the power management for computer images Option2 Settings MenuResetting to the default values POWER/STANDBY indicator Setting the picture to suit the movie PLE settings Reducing burn-in of the screen Inverse Settings Orbiter settings Orbiter Function settings Screen Wiper Setting the time To select on for the Working Time Setting the screen size for S1/S2 video input Soft Focus settings Gray Level settings SpeedSetting the picture size for RGB input signals Setting the signal and black level for DVI signal S1/S2 settings PLUG/PLAY settingsOption3 Settings Menu Using the timer Present Time settings Present TimeSetting the power on mode To reset the program To reset the data Special characters in the Program Timer screenEnabling/disabling remote control wireless transmission PWR. on Mode settings Control Lock settings IR Remote settingsLoop Out setting ID number settingVideo Wall setting Divider settings Video Wall Position settings Divider Image Adjust settings Auto ID settings DISP. Mode settings On Delay Power on delay P. on Delay settings PLE Link settings PLE LinkAdvanced OSM Settings Menu Setting the menu modeRepeat Timer Repeat Timer settingsLanguage Settings Menu Color System Settings MenuSetting the language for the menus Setting the video signal formatExternal Control ApplicationConnections Communication ParametersTroubleshooting Symptom Checks RemedyPage Limited Warranty Plasma Monitors This warranty may be enforced only by the first purchaserFor More Information Telephone 408 735 Faroudja Palomar Ave Sunnyvale, CA