Check Engine Oil Level, Check Battery Charge

Exmark 920, 000 & higher manual Check Engine Oil Level, Check Battery Charge

		Maintenance

	Maintenance Service	Maintenance Procedure
	Interval	Maintenance Procedure
	Interval
	Every 200 hours	• Grease the brake brackets.

	Every 400 hours	• Replace the fuel filter/water separator (more often in dirty or dusty conditions).

		• Check the wheel hub slotted nut torque specifications.
	Every 500 hours	• Check the wheel lug nuts.
	Every 500 hours	• Change the hydraulic filter (Every 250 hours/yearly if using Mobil 1 15W50)

		• Check the park brake adjustment.

	Every 600 hours	• Replace the air cleaner elements. (May need more often under severe conditions. See the
	Every 600 hours	Engine Owner’s Manual for additional information.)
		Engine Owner’s Manual for additional information.)

	Every 4,000 hours	• Change engine coolant. Dex-Cool©extended life coolant (orange color)
	Monthly	• Check the battery charge.

		• Change the engine oil if operated less than 100 hours.
		• Grease the front caster wheel hubs.
	Yearly	• Grease front caster pivots.
	Yearly	• Grease the deck drive belt idler arm.
		• Grease the deck drive belt idler arm.
		• Grease the mule drive belt idler arm.
		• Grease the pump drive belt idler arm.

Periodic Maintenance

Check Engine Oil Level

Service Interval: Before each use or daily

1.Stop engine and wait for all moving parts to stop. Make sure unit is on a level surface.

2.Check with engine cold.

3.Raise radiator to gain access to dipstick.

CAUTION

If the radiator prop rod is not securely positioned in the notch the radiator may fall. Falling radiator could cause serious injury.

Be sure the prop rod is engaged securely in the notch at the far right side of the slot.

4.Clean area around dipstick. Remove dipstick and wipe oil off. Reinsert the dipstick and push it all the way down into the tube. Remove the dipstick and read the oil level.

5.If the oil level is low, wipe off the area around the oil fill cap, remove cap and fill to the “FULL” mark on the dipstick. Exmark 4-Cycle Premium Engine Oil is recommended; refer to the Engine Owner’s manual for an acceptable alternative. Do Not overfill.

Important: Do Not operate the engine with the oil level below the “LOW” (or “ADD”) mark on the dipstick, or over the “FULL” mark.

Check Battery Charge

Service Interval: Monthly

WARNING

CALIFORNIA

Proposition 65 Warning

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

Allowing batteries to stand for an extended period of time without recharging them will result in reduced performance and service life. To preserve optimum battery performance and life, recharge batteries in storage when the open circuit voltage drops to 12.4 volts.

Note: To prevent damage due to freezing, battery should be fully charged before putting away for winter storage.

920, 000 & higher specifications

The Exmark 920 is an exceptional piece of equipment tailored for professionals and enthusiasts alike. Designed with an emphasis on performance and reliability, this mower embodies the pinnacle of lawn care technology. Known for its robust construction, the Exmark 920 is equipped with a powerful engine, ensuring efficient and effective mowing even in demanding conditions.

One of the standout features of the Exmark 920 is its cutting deck. With a 52-inch or 60-inch mower deck option, it allows users to cover a large mowing area quickly. The deck is crafted from high-strength steel, providing durability and longevity while maintaining a lightweight design that enhances maneuverability. Innovative blade design promotes superior airflow for an even cut, preventing clumping and ensuring a polished finish across various grass types.

The Exmark 920 utilizes advanced technology, including the innovative RED Technology, which enhances engine performance by optimizing power consumption. This results in reduced fuel consumption while maintaining the required power output for demanding tasks. Additionally, the mower’s intuitive controls include a user-friendly interface, allowing for easy adjustments and settings, catering to the varying needs of different lawn types and conditions.

Another notable feature of the Exmark 920 is its all-day comfort design. With an ergonomic seat and advanced suspension system, operators can tackle long mowing sessions without discomfort. The padded seat is adjustable, providing maximum support to minimize fatigue, while the suspension system absorbs bumps and uneven terrain for a smoother ride.

Furthermore, the Exmark 920 prioritizes serviceability. Easy access points for maintenance and a well-designed layout ensure that routine tasks, such as oil changes and blade replacements, can be completed efficiently. The model also comes equipped with LED headlights for improved visibility during early morning or late evening mowing.

In summary, the Exmark 920 is a sophisticated mower combining power, advanced technology, and design for comfort and utility. Its high-performance engine, durable cutting deck, user-friendly controls, and serviceable layout make it an ideal choice for anyone seeking to achieve a well-manicured lawn with professional results. Whether for commercial or residential use, the Exmark 920 stands out as a leading option in the market, enabling users to tackle any mowing challenge with confidence and ease.

Maintenance Service