Exmark Complete Specifications of the LZ27KC604 Lawn Mower

Page 16

Specifications

Optional suspension seat: molded adjustable flip-up armrests.

Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

Hydrostatic Ground Drive System

Hydrostatic Pumps: Two Hydro Gear variable displacement piston pumps.

Wheel Motors: Two Parker with 1 1/4 inch tapered shafts.

Hydraulic Oil Type: Use Mobil 1 15W-50 Synthetic motor oil.

Hydraulic Oil Capacity: 2.1 qt. (2.0 L)

Hydraulic Filter: Replaceable cartridge type.

Summer use above 32°F (0°C)

P/N 109-4180: 25 microns, 10 psi bypass

Winter use below 32°F (0°C)

P/N 1-523541: 40 microns, 18 psi bypass

Speeds:

0–9.8 mph (15.8 km/hr) forward.

0-6.3 mph (10.1 km/hr) reverse.

Drive wheel release valves allow machine to be moved when engine is not running.

Tires & Wheels

 

Drive

Front Caster

 

Pneumatic

Semi-Pneumatic

 

(Air-Filled)

 

Quantity

2

2

Tread Size

“Multi- Trac

Smooth

 

C/S”

 

Size

24 x 12.00-12

13 x 6.50-6

 

 

 

Ply Rating

4

 

Pressure

13 psi (90 kPa)

 

Cutting Deck

Cutting Width: 60 inch (152.4 cm)

Discharge: Side

Blade Size: (3 ea.) 20.50 inches (52.1 cm)

Blade Spindles: Solid steel spindles with 1 inch (25.4 mm) I.D. bearings.

Deck Drive:

Electric clutch mounted on horizontal engine shaft. “B” Section belt (with self-tensioning idler) from electric clutch to transfer shaft mounted on deck.

Blades are driven by one “B” Section belt (w/self-tensioning idler) from transfer shaft on deck to blade spindles.

Deck:

Full floating deck is attached to out-front support frame. Six anti-scalp rollers provide maximum turf protection. Deck design allows for bagging, mulching or side discharge.

Deck Depth: 5.5 inches (14.0 cm)

Cutting Height Adjustment:

An extra-long cushioned lever is used to adjust the cutting height from 1 1/2 inch (3.8 cm) to 5 inches (12.7 cm) in 1/4 inch (6.4 mm) increments. The cutting height adjustment handle has a transport position and all adjustments can be made while the operator remains seated. Units also have a foot operated deck lift assist lever to aid in raising the deck.

Mulching Kit: Optional.

Dimensions

Overall Width:

Without Deck

53.5 inches (135.9 cm)

Deflector Up

61.4 inches (156.0 cm)

Deflector Down

72.2 inches (183.4 cm)

 

 

Overall Length:

Roll Bar - Up

81.9 inches (208.0 cm)

Roll Bar - Down

92.6 inches (235.2 cm)

 

 

16

Image 16
Contents Lazer Z California Exmark Parts Plus Program Introduction Contents Safety Safety Alert SymbolSafe Operating Practices TrainingSafety Operation Slope OperationUsing the Rollover Protection System Rops Maintenance and Storage Safety and Instructional Decals 633922 643222 643339 98-5954 103-1798 103-3270 103-4474 103-4930 103-5881 103-6319 107-2102 107-2112 109-1214 109-1215 109-3148 109-7949 103-9255 Model Numbers SpecificationsSystems Dimensions Product Overview Torque RequirementsOperation ControlsPre-Start Operating InstructionsEngaging the PTO Disengaging the PTOStopping the Engine Driving the MachineAdjusting the Cutting Height Driving ForwardAdjusting the Anti-Scalp Rollers Transporting a Unit TransportingLoading a Unit Operation Maintenance Recommended Maintenance SchedulesCheck Battery Charge Service Interval Before each use or dailyService Interval Monthly Check Engine Oil LevelCheck Safety Interlock System Check Mower BladesCheck Rollover Protections Systems Roll Bar Pins Service Air CleanerCheck Seat Belt Check for Loose HardwareChange Engine Oil Check Hydraulic Oil LevelCheck Tire Pressures Check Condition Of BeltsService Interval Yearly Lubricate Caster Wheel HubsLubricate Seat Switch Actuator Lubricate Brake Handle PivotLubricate Brake Rod Bushings Lubricate Motion Control Bronze BushingsWheel Hub Slotted Nut Torque Specification Fuel Tank Mounting Hardware SpecificationsChange Fuel Filter Change Hydraulic System FilterMobil HTS Grease Or Food-Grade Anti-seize Copper-Based Anti-seizeDielectric Grease Deck LevelingMule Drive Belt Tension Adjustment Pump Drive Belt TensionBrake Link Adjustment Belt Guide AdjustmentBrake Adjustment Deck Belt TensionReverse Indicator Adjustment Electric Clutch AdjustmentMotion Control Linkage Adjustment Motion Control Damper Adjustment Caster Pivot Bearings Pre-Load Adjustment Adjust Seat SwitchClean Engine Cooling System Remove Engine Shrouds and Clean Cooling FinsClean Grass Build-Up Under Deck Waste DisposalMaintenance Troubleshooting Problem Possible Cause Corrective ActionTroubleshooting Schematics Electrical DiagramHydraulic Diagram Year Limited Warranty Exmark Turf Equipment Service Record Page See Exmark’s Complete Line of Accessories