Maintenance
Lubrication Chart
| Fitting | Initial | Number of | Service |
Locations | Pumps | Places | Interval | |
1. | Front | *0 | 2 | *Yearly |
Caster |
|
|
| |
Wheel Hubs |
|
|
| |
2. | Front | *0 | 2 | *Yearly |
Caster |
|
|
| |
Pivots |
|
|
| |
3. | Height | 1 | 5 | 40 Hours |
Adjustment |
|
|
| |
Shaft |
|
|
| |
Bearings |
|
|
| |
4. | Deck | 1 | 1 | Yearly |
Drive Belt |
|
|
| |
Idler Arm |
|
|
| |
5. | Brake | 1 | 2 | 200 Hours |
Brackets |
|
|
| |
6. | Mule | 1 | 1 | Yearly |
Drive Belt |
|
|
| |
Idler Arm |
|
|
| |
7. | Pump | 1 | 1 | Yearly |
Drive Belt |
|
|
| |
Idler Arm |
|
|
| |
8. | Deck | 1 | 2 | 40 Hours |
Rear Struts |
|
|
| |
*See step 3 for special lubrication instructions on the front caster pivots and the Lubricate Caster Wheel Hubs section for special lubrication instructions on the front casters wheel hubs.
Number 6 (Mule Drive Belt Idler Arm) Located
Under Engine Frame
Number 7 (Pump Drive Belt Idler Arm) Located
Under Engine Frame
3.Lubricate front caster pivots once a year. Remove hex plug and cap. Thread grease zerk in hole and pump with grease until it oozes out around top bearing. Remove grease zerk and thread plug back in. Place cap back on.
Lubricate Caster Wheel Hubs
Service Interval: Yearly
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
| Figure 13 |
1. Seal guard | 2. Spacer nut with wrench |
| flats |
2.Remove caster wheel from caster forks.
3.Remove seal guards from the wheel hub.
30