1.6SAFETY SIGNS
1.6.1Keep all safety signs legible. Remove all grease, dirt and debris from safety signs and instructional labels.
1.6.2Safety signs must be replaced if they are missing or illegible.
1.6.3When new components are installed, be sure that current safety signs are affixed to the replaced components.
1.6.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.
1.6.5Safety signs may be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.6.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.
PART NO. 513747
LOCATION: Top Center of Console Under
Front of Seat
PART NO. 323540
LOCATION: Left Front Corner Top of
Mower Deck
PART NO. 403005
LOCATION: Left and Right Corners
of Mower Deck
| Serial Nos. 220,000 & Higher |
|
| PART NO. 643401 |
|
PART NO. 513742 | LOCATION: On Tilt Switch | PART NO. 303508 |
| ||
LOCATION: On Top of Mower Deck Belt | LOCATION: Front Right Corner | |
Shields, Left and Right Sides | Top of Mower Deck |
PART NO. 603845
LOCATION: Under Seat, on Frame Adjacent to Right Fuel Tank
Serial Nos. 220,000 & Higher PART NO. 643372
LOCATION: Top LH Side of Console, Under Front of Seat
- 6 -