Exmark LAZER ZTM manual Waste Disposal, Motor OIL Disposal, Mercury Switch Disposal

Page 37

6. WASTE DISPOSAL

6.1 MOTOR OIL DISPOSAL

Engine oil and hydraulic oil are both pollutants to the environment. Dispose of used oil at a certified recycling center or according to your state and local regulations.

6.2 MERCURY SWITCH DISPOSAL

CAUTION

POTENTIAL HAZARD

♦The mercury contained in the tilt switch is poisonous.

WHAT CAN HAPPEN

♦Exposure to mercury can cause severe illness.

HOW TO AVOID THE HAZARD

♦Never attempt to open or repair the tilt switch

♦Avoid contact with the mercury.

The tilt switch (PN 633782) on this unit contains mercury, a hazardous material. Mercury that is outside a sealed container vaporizes at room temperature. The vapors are harmful. Mercury can be absorbed through the skin. Do not attempt to open or repair this switch.

A very small amount of mercury is contained in a hermetically sealed body. The steel switch is then potted in a hard epoxy in a plastic case. It is unlikely that the mercury will ever escape from the enclosure. These high performance and reliable inexpensive switches are recyclable. Mercury is an important and beneficial compound but requires special care in handling and disposal. When used and managed properly, mercury is not a threat to people or the environment. This information is presented to users so that they are aware that these switches contain mercury and will apply sound disposal practices when these devices reach their normal end of life or are damaged.

Several states have passed laws concerning the disposal of devices containing mercury. In all the remaining states it is advisable to follow similar procedures. The laws state that these sealed devices contain mercury and should not be placed in the garbage until the mercury is removed and reused, recycled or otherwise managed to insure that it does not become part of solid waste or waters. Management and disposal practices must be within relevant federal, state or local laws.

Return the switch to your Exmark dealer if it is faulty and is being replaced or if the unit containing the switch is no longer operating and is being scrapped. If the switch is damaged or broken open use extreme caution in handling. Call you local waste management authority or Exmark Customer Service for instructions.

- 32 -

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Your Safety is Involved SafetySafety Alert Symbol TrainingPotential Hazard Operation Maintenance and Storage Potential Hazard Safety Signs Park Brake Model Number SpecificationsEngine Fuel SystemHydrostatic Ground Drive System Operator ControlsTires and Wheels DimensionsCutting Deck Discharge chute up Discharge chute downAssembly Instructions Position Discharge Chute Service EngineCharging the battery may produce explosive gasses Operation Instructions Service Hydraulic OILControls Push the lever forward and down to disengage the brake PRE-START Transporting MowingDo not drive a unit on a public street or roadway Periodic Maintenance Maintenance & AdjustmentsService Interval Daily Service Interval Daily or more often in dry conditionsBlade Bolt Installation Service Interval 25 hrs More often under severe conditions Service Interval 40 hr Service Interval 100 hrsService Interval 40 hrs Lubrication ChartService Interval Refer to chart Service Interval 80 hrs Service Interval 160 hrsService Interval After First 250 hrs Then yearly thereafter Service Interval As RequiredCutting Height Position AdjustmentsANTI-SCALP Roller Adjustment Brake Adjustment Self-tensioning No adjustment necessaryNo adjustment necessary Motion control linkage adjustment Motion Control Adjustment Waste Disposal Mercury Switch DisposalMotor OIL Disposal Battery Disposal Trouble ShootingMower Pulls Left or Right W/LEVERS Fully Forward Mower Cuts UnevenlyProblem Engine Troubleshooting TableElectrical Diagram Hydraulic Diagram Warranty Page Page Page Service Record Page See EXMARK’S Complete Line of Products for Turf Care

LAZER ZTM specifications

The Exmark Lazer ZTM represents a pinnacle of engineering excellence in the world of commercial zero-turn mowers. Renowned for its exceptional performance and durability, it is a favorite among landscaping professionals who require reliable equipment that can tackle the toughest mowing conditions.

At the heart of the Lazer ZTM is the powerful Kohler and Kawasaki engines that provide a range of horsepower options, ensuring that there is a configuration suitable for various mowing tasks. The efficiency of these engines is complemented by advanced cooling systems and heavy-duty air filtration, which helps to extend their life and optimize performance.

One of the standout features of the Lazer ZTM is its innovative UltraCut mowing deck. Available in various cutting widths, from 48 inches to 72 inches, the UltraCut deck is designed to deliver a premium cut quality across a range of grass types and conditions. Its unique design allows for superior airflow, resulting in better clipping dispersal and a clean cut. The adjustable cutting height provides operators with versatility, enabling them to tailor the height to specific requirements.

The Lazer ZTM is equipped with Exmark's innovative RED Technology, which stands for redesigned engine diagnostics. This smart technology allows operators to monitor the mower's performance in real time, providing crucial data on engine health, RPM, and fuel efficiency. This integration of technology enhances operational efficiency, limits downtime, and extends the lifespan of the mower.

Another hallmark of the Lazer ZTM is its robust construction. The frame is engineered from heavy-duty steel, ensuring longevity and resistance to wear and tear. Its commercial-grade components are designed to withstand the rigors of daily use, making it a reliable choice for professional landscapers.

Comfort and ergonomics also play a significant role in the Lazer ZTM’s design. The operator platform features a cushioned seat with adjustable armrests, providing comfort during extended mowing sessions. The control layout is intuitive, allowing for seamless operation and maneuverability in tight spaces.

Overall, the Exmark Lazer ZTM stands out for its combination of power, cutting efficiency, and operator comfort. Its commitment to innovation and quality makes it a leading choice for those looking to elevate their mowing experience. Whether for commercial landscaping or large property maintenance, the Lazer ZTM promises to deliver outstanding results.
Top Page Image Contents