Exmark LAZER ZTM manual Operator Controls, Hydrostatic Ground Drive System

Page 14

2.4.2Charging Capacity: 15 amps

2.4.3Battery Type: BCI Group U1

2.4.4Battery Voltage: 12 Volt

2.4.5Polarity: Negative Ground

2.4.6Fuses: Two 20 amp blade type

2.4.7Safety Interlock System: Operator must be in seat with Blades disengaged, brake engaged, and motion control levers out (neutral lock) to start engine.

Operator must be in seat when Blades are engaged, brake is disengaged, or motion control levers are moved in or engine will stop.

Engine will stop if either the left, the right, or both levers are moved from neutral lock position while brake is engaged.

2.4.8Tilt Switch: (Serial Nos. 220,000 & Higher) Shuts off the engine when the unit is tilted more than 60° from horizontal.

2.5OPERATOR CONTROLS

2.5.1Steering and Motion Control:

Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

Moving motion control levers outward (in slots) locks the drive system in neutral.

2.5.2Blade Engagement Switch: Engages electric clutch (to drive belt) which engages mower blades.

2.5.3Parking Brake Lever: Sets brakes.

2.5.4Deck Height Adjustment Lever: Sets cutting height to desired position.

2.6SEAT

2.6.1Type: Standard seat: high back, foam padded (internal spring suspension)with arm rests.

Optional suspension seat: high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) with armrests.

2.6.2Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with prop rod. Adjustable fore and aft seat track.

2.6.3Armrests: Standard seat: foam padded flip-up armrests.

Optional suspension seat: molded adjustable flip-up armrests.

2.6.4Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

2.7HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1Hydrostatic Pumps: Two Hydro Gear BDP-10L variable displacement piston pumps.

2.7.2Wheel Motors: Two Parker/Ross with 1 1/4” tapered shafts.

2.7.3Hydraulic Oil Type: Synthetic Mobil 1 15W-50.

2.7.4Hydraulic Oil Capacity: 2.1 qt.(2.0 L.)

- 9 -

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Table of Contents Safety Alert Symbol SafetyYour Safety is Involved TrainingPotential Hazard Operation Maintenance and Storage Potential Hazard Safety Signs Park Brake Engine SpecificationsModel Number Fuel SystemOperator Controls Hydrostatic Ground Drive SystemCutting Deck DimensionsTires and Wheels Discharge chute up Discharge chute downAssembly Instructions Service Engine Position Discharge ChuteCharging the battery may produce explosive gasses Controls Service Hydraulic OILOperation Instructions Push the lever forward and down to disengage the brake PRE-START Mowing TransportingDo not drive a unit on a public street or roadway Service Interval Daily Maintenance & AdjustmentsPeriodic Maintenance Service Interval Daily or more often in dry conditionsBlade Bolt Installation Service Interval 25 hrs More often under severe conditions Service Interval 100 hrs Service Interval 40 hrService Interval Refer to chart Lubrication ChartService Interval 40 hrs Service Interval 160 hrs Service Interval 80 hrsService Interval As Required Service Interval After First 250 hrs Then yearly thereafterAdjustments Cutting Height PositionANTI-SCALP Roller Adjustment Self-tensioning No adjustment necessary Brake AdjustmentNo adjustment necessary Motion control linkage adjustment Motion Control Adjustment Motor OIL Disposal Mercury Switch DisposalWaste Disposal Mower Pulls Left or Right W/LEVERS Fully Forward Trouble ShootingBattery Disposal Mower Cuts UnevenlyEngine Troubleshooting Table ProblemElectrical Diagram Hydraulic Diagram Warranty Page Page Page Service Record Page See EXMARK’S Complete Line of Products for Turf Care

LAZER ZTM specifications

The Exmark Lazer ZTM represents a pinnacle of engineering excellence in the world of commercial zero-turn mowers. Renowned for its exceptional performance and durability, it is a favorite among landscaping professionals who require reliable equipment that can tackle the toughest mowing conditions.

At the heart of the Lazer ZTM is the powerful Kohler and Kawasaki engines that provide a range of horsepower options, ensuring that there is a configuration suitable for various mowing tasks. The efficiency of these engines is complemented by advanced cooling systems and heavy-duty air filtration, which helps to extend their life and optimize performance.

One of the standout features of the Lazer ZTM is its innovative UltraCut mowing deck. Available in various cutting widths, from 48 inches to 72 inches, the UltraCut deck is designed to deliver a premium cut quality across a range of grass types and conditions. Its unique design allows for superior airflow, resulting in better clipping dispersal and a clean cut. The adjustable cutting height provides operators with versatility, enabling them to tailor the height to specific requirements.

The Lazer ZTM is equipped with Exmark's innovative RED Technology, which stands for redesigned engine diagnostics. This smart technology allows operators to monitor the mower's performance in real time, providing crucial data on engine health, RPM, and fuel efficiency. This integration of technology enhances operational efficiency, limits downtime, and extends the lifespan of the mower.

Another hallmark of the Lazer ZTM is its robust construction. The frame is engineered from heavy-duty steel, ensuring longevity and resistance to wear and tear. Its commercial-grade components are designed to withstand the rigors of daily use, making it a reliable choice for professional landscapers.

Comfort and ergonomics also play a significant role in the Lazer ZTM’s design. The operator platform features a cushioned seat with adjustable armrests, providing comfort during extended mowing sessions. The control layout is intuitive, allowing for seamless operation and maneuverability in tight spaces.

Overall, the Exmark Lazer ZTM stands out for its combination of power, cutting efficiency, and operator comfort. Its commitment to innovation and quality makes it a leading choice for those looking to elevate their mowing experience. Whether for commercial landscaping or large property maintenance, the Lazer ZTM promises to deliver outstanding results.
Top Page Image Contents