Exmark 000 & higher, 312 manual Recommended Maintenance Schedules

Page 26

Maintenance

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

WARNING

While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

After the first 2 hours

Inspect PTO clutching belt tension. Check every 2 hours for the first 8 hours of operation.

 

 

 

After the first 5 hours

Change the engine oil.

 

 

 

After the first 100 hours

Check wheel hub-slotted torque specification.

 

 

 

After the first 250 hours

Change the hydraulic filter.

 

 

 

• Check the engine oil level.

 

Check the mower blades.

 

• Check the safety interlock system.

 

Check for loose hardware.

Before each use or daily

• Grease the caster wheel bearings.

Grease caster pivots.

 

 

Check the LPG tank and components.

 

• Clean the engine and exhaust system area.

 

• Clean the grass and debris build-up from the machine and cutting deck.

 

• Clean the grass build-up from under the deck.

 

 

Every 25 hours

• Service the air cleaner. (May need more often under severe conditions. See the Engine

 

Owner's manual for additional information.)

 

 

 

 

 

• Check the hydraulic oil level.

 

• Check the tire pressures.

 

• Check the condition of the belts.

 

• Grease the pump drive idler pivot.

Every 40 hours

Grease the clutch arm pivot.

 

• Grease the pump control bearings.

 

• Grease the mower deck idler pivot.

 

• Check the entire LPG fuel delivery system.

 

• Inspect PTO clutching belt tension.

 

 

 

Every 80 hours

Remove engine shrouds and clean cooling fins.

 

 

 

Every 100 hours

Change the engine oil. (May need more often under severe conditions.)

 

 

 

Every 160 hours

Check the spark plugs. (See Check Spark Plug section for proper spark plug gap.)

 

 

 

26

Image 26
Contents Turf Tracer Series LP All Rights Reserved Introduction Contents Safe Operating Practices SafetySafety Alert Symbol TrainingSafety Inspection With each tank changeTank Requalification OperationWeekly Maintenance and Storage Slope OperationSafety Safety Safety and Instructional Decals 553049 98-5954 103-1798 103-1976 103-2076 103-2103 103-2242 103-2243 103-4935 109-3148 109-9870 109-9875 116-0404 117-2718 109-9906 Systems SpecificationsModel Numbers Dimensions Product Overview Torque RequirementsOperation ControlsPre-Start Starting the Engine Operating InstructionsOpen the Fuel Valve Disengaging the PTODriving Forward Driving the MachineDrive Lever/Neutral Lock Latch Operation Adjusting the Cutting Height Driving in ReverseTransporting a Unit Adjusting the Anti-Scalp RollersTransporting Operation Maintenance Recommended Maintenance SchedulesCheck Engine Oil Level Check Battery ChargeRecommended Jump Starting Procedure Proposition 65 WarningDo Not jump start a weak battery if these conditions exist Check Mower BladesReplacing the Discharge Deflector Check for Loose Hardware Check Safety Interlock SystemService Pre-Cleaner Element and Air Cleaner Check Tire Pressures Change Engine OilCheck Hydraulic Oil Level Check Condition Of BeltsCheck Spark Plugs Check LPG TankCheck LPG Fuel Delivery System Change LPG TankChange Hydraulic System Filter LevelHydraulic System Air Purge Thread Locking Adhesives Wheel Hub-Slotted Nut Torque SpecificationInspect PTO Clutching Belt Tension Mobil HTS Grease Or Food-Grade Anti-seizeDielectric Grease Park Brake AdjustmentHydro Drive Linkage Adjustment Deck LevelingAdjust Neutral Control Linkages Adjust Hydro Control LinkagesDrive Lever Linkage Adjustment Need to be adjustedPTO Safety Switch Tracking AdjustmentHydro Pump Spring Tension Setting LPG RegulatorClean Debris From Machine Clean Engine and Exhaust System AreaRemove Engine Shrouds and Clean Cooling Fins Clean Grass Build-Up Under DeckMaintenance Troubleshooting Problem Possible Cause Corrective ActionSee Check Spark Plug section Troubleshooting Schematics Electrical DiagramHydraulic Diagram Exmark Commercial Turf Equipment Page Service Record Date Description of Work Done Service Done ByPage This page may be copied for personal use See EXMARK’S Complete Line of Accessories and Options
Related manuals
Manual 60 pages 29.4 Kb Manual 48 pages 5.05 Kb Manual 52 pages 61.7 Kb Manual 60 pages 62.85 Kb Manual 60 pages 57.72 Kb Manual 60 pages 43.2 Kb Manual 64 pages 1.01 Kb Manual 56 pages 15.39 Kb Manual 28 pages 32.2 Kb Manual 52 pages 57.34 Kb Manual 60 pages 42.39 Kb Manual 60 pages 23.73 Kb Manual 40 pages 46.04 Kb

0, 312, 000 & higher specifications

Exmark has long been synonymous with excellence in the world of lawn care and landscaping, and their 000 & higher, 0,312 series is no exception. Engineered for both professional landscapers and passionate homeowners, this series brings together innovative technology with robust design to deliver unparalleled performance and durability.

One standout feature of this series is its powerful engine options, which ensure efficient cutting and grass handling capabilities. The engines are designed to provide consistent power and reliability, even in tough conditions. This reliability is complemented by high-quality cutting decks that deliver precision cuts and exceptional mulching abilities, ensuring that your lawn stays healthy and vibrant.

The cutting height adjustment system allows users to easily modify the height to suit various types of grass and landscaping needs. This adaptability ensures that your grass is always maintained at the optimal length for health and aesthetics. The ergonomic design of the handles incorporates comfort grips, reducing fatigue during prolonged use while providing excellent control over the machine.

Another significant aspect of the 000 & higher, 0,312 series is its advanced technology integration. Many models in this series come equipped with efficient fuel systems that enhance performance while minimizing fuel consumption. Furthermore, the inclusion of intelligent controls and monitoring systems enables users to make informed adjustments, ensuring that the equipment operates at peak performance.

The robust construction of the chassis and frame means that these machines can withstand the rigors of everyday use in various landscapes. The high-quality materials used in the manufacturing process enhance the longevity of the equipment, making it a worthy investment for those serious about maintaining their lawns.

In addition, Exmark places a strong emphasis on safety features. The series includes protective shields and easy-to-access controls that prioritize user safety without compromising on functionality. Maintenance is made simple through user-friendly designs, allowing for quick access to essential components.

In conclusion, the Exmark 000 & higher, 0,312 series presents a perfect blend of power, innovation, and user-focused features. With its reliable performance, flexible adjustment options, and sturdy design, this series continues to set the standard for excellence in lawn care equipment. Whether you’re a professional or a homeowner, the Exmark 000 & higher, 0,312 series stands ready to meet all your landscaping needs.