Hayter Mowers SST38/ST42 Fuel Filler CAP, Engine OIL Filler CAP, Transaxle Bypass Lever

1.23 OPERATING THE TRACTOR 1.23

FUEL FILLER CAP

Clean grass and other debris from around the filler cap and neck of the tank before removing the cap for re-fuelling.

WARNING: PREVENT ACCIDENTS - The fuel filler cap must not be removed whilst the engine is run- ning.

IMPORTANT: The fuel filler cap must be secured to prevent fuel leakage during operation.

ENGINE OIL FILLER CAP

Clean grass and other debris from around the filler cap before removing it.

IMPORTANT: The engine oil filler cap should not be removed while the engine is running and must be secured to prevent oil leakage during operation.

TRANSAXLE BYPASS LEVER

IMPORTANT: Always push the tractor by hand. Never tow the tractor as damage may occur.

Park the tractor on a level surface, disengage the cutterdeck drive switch and sweeper drive switch, engage the parking brake and stop the engine.

Locate the transaxle bypass lever on the tractor rear bulkhead (Refer fig.1). Pull the transaxle bypass lever out and twist to engage the pin on the face of the rear bulkhead (Refer fig.2)

Release the parking brake. The tractor is now ready to be pushed.

Re-engage the transaxle drive by reversing the procedure.

Fig.1

Fig.2

150005MA010302A