1.40 | TROUBLE SHOOTING | 1.40 |
TROUBLE SHOOTING
| FAULT | POSSIBLE CAUSE | REMEDY |
|
|
|
|
| Engine overheats. | Engine load excessive. | Reduce ground speed. |
|
| Engine oil level is low. | Add oil to engine. |
|
| Cooling fins and air passages under engine | Remove obstruction from cooling fins and |
|
| blower housing are plugged. | air passages. |
|
| Air vents in engine cover blocked with debris. | Clear vents of debris. |
|
| Fan cover on top of engine blocked with | Clear cover of debris. |
|
| debris. |
|
|
|
|
|
| Tractor does not drive. | Traction belt is worn, loose or broken. | Contact Authorised Service Dealer. |
|
| Traction belt is off the pulley. | Contact Authorised Service Dealer. |
|
|
|
|
| Engine loses power. | Engine load is excessive. | Reduce ground speed. |
|
| Air cleaner is dirty. | Clean air cleaner elements. |
|
| Oil level in crankcase is low. | Add oil to crankcase. |
|
| Air vents in engine cover blocked with debris. | Clear vents of debris. |
|
| Fan cover on top of engine blocked with | Clear cover of debris. |
|
| debris. |
|
|
| Spark plug is pitted, fouled or gap is incor- | Install new, correctly adjusted spark plug. |
|
| rect. |
|
|
| Vent hole in fuel cap is plugged. | Clean or replace the fuel cap. |
|
| Dirt in fuel filter. | Replace fuel filter. |
|
| Dirt, water or stale fuel is in fuel system. | Contact Authorised Service Dealer. |
|
|
|
|
| Abnormal vibration. | Cutterblade(s) bent or unbalanced. | Install new cutterblade(s) |
|
| Blade mounting screws are loose. | Tighten blade mounting screws. |
|
| Engine mounting bolts are loose. | Tighten engine mounting bolts. |
|
| Loose engine pulley, idler pulley or blade pul- | Tighten the appropriate pulley. |
|
| ley. |
|
Engine pulley is damaged.
Contact Authorised Service Dealer.
Blade drive belt is damaged.
Install new blade drive belt.
150005MA010302A