Husqvarna Edger Attachment manuel dutilisation Assembly, Start and Stop, Assembling the angle gear

Page 8

ASSEMBLY

Assembling the angle gear

•Assemble the angle gear

back on the supporting tube.

Turn the blade so that the drive shaft engages in the angle gear.

• Position the angle gear so that its slot is aligned with the line on the supporting tube.

•Firmly tighten the screw.

Assembling the blade

START AND STOP

Control before starting

For reasons of safety follow these recommendations!

•Check that the support

flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

• Ensure that the nut has not lost its tightening capacity. The nut lock shall have a locking torque of at least l.5 Nm. The nut’s tightening torque shall be 35-50 Nm.

•Check that the blade and

blade guard are not damaged or cracked. Replace the blade or blade guard if it has been exposed to impact or if it is cracked.

Fit the blade as follows:

1.Fit the drive disc (A) on the outgoing shaft. Make sure that the edge that fits in the hole of the blade is facing outward.

2.Block the blade rotation by inserting locking pin in the hole behind the blade guard engaging it in the corresponding hole in the drive disc.

3.Fit the blade (B) on the drive disc.

4.Fit the support

flange (C). The support flange must be fitted with its outer edge hard up against the blade.

5.Fit the locknut (D). NOTE! The locknut has left-hand threads. The tightening torque of the locknut is 35 – 50 Nm.

6.Remove the locking pin.

A

B

C

D

NOTE! Do not forget to remove the locking pin before using the machine.

!WARNING!

Under no circumstances may the edge cutter blade be used without the blade guard fitted.

8 – English

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Edger Attachment Explanation of Symbols SymbolsContents Personal protective equipment Safety InstructionsMachine’s safety equipment General safety instructions General working instructionsBasic working techniques Safety instructions while workingSafety instructions after completing work What is WHAT? What is what on the edger attachment?Assembly Start and StopAssembling the angle gear Assembling the bladeMaintenance Technical DataAVERTISSEMENT! Le tranche- bordure peut être dangereux Explication DES SymbolesSymboles Sommaire SommairePersonnelle Consignes DE SecuriteEquipement de protection Consignes générales de sécurité Instructions générales de travailConsignes de sécurité après le travail Techniques de travail de baseConsignes de sécurité pendant le travail Quels Sont LES COMPOSANTS? Quels sont les éléments du kit coupe-bordure?Montage Marche ET ArretMontage de lengrenage angulaire Montage de la lameEntretien Caracteristiques TechniquesEl trabajo Significado DE LOS SímbolosSímbolos Contenido ContenidoÍndice Instrucciones DE Seguridad Equipo de protección personalEquipo de corte Protección delInstrucciones generales de trabajo Protección personalInstrucciones de seguridad para el entorno Instrucciones de seguridad antes de arrancarInstrucciones de seguridad después del trabajo Técnica básica de trabajoInstrucciones de seguridad durante el trabajo ¿QUÉ ES QUE? ¿Qué es que en el suplemento para cortar cantos?Montaje Arranque Y ParadaMontaje del reductor angular Montaje de la cuchillaMantenimiento Datos Técnicos´+H¶0B¨ Page 114 00 2002W12

Edger Attachment specifications

The Husqvarna Edger Attachment is an essential tool for landscaping and garden maintenance, designed to provide a professional finish to borders and edges around sidewalks, driveways, and flower beds. Compatible with various Husqvarna trimmers and powerheads, this edger attachment enhances versatility and efficiency, making it a valuable addition to any outdoor maintenance arsenal.

One of the key features of the Husqvarna Edger Attachment is its powerful cutting capability. Equipped with a sharp, durable blade, the attachment easily slices through grass and soil, producing clean, precise edges. The hardened steel blade ensures longevity, making it ideal for regular use in a variety of landscaping scenarios. An adjustable cutting depth allows users to customize the blade's position based on their specific edging needs, providing flexibility for different types of terrain.

Furthermore, the Husqvarna Edger Attachment utilizes advanced technology to enhance performance and user experience. The edger boasts an ergonomic design that minimizes vibrations and reduces operator fatigue, making long hours of work more manageable. The built-in support wheel helps maintain control while edging, ensuring consistent cutting depth and accuracy, even on uneven surfaces.

The attachment is designed with ease of use in mind. Quick-release mechanisms allow for easy attachment and detachment, letting users switch between tools without hassle. Its lightweight construction makes it easy to maneuver, reducing the strain on the operator during extended sessions.

Durability is another hallmark of the Husqvarna Edger Attachment. Constructed from high-quality materials, it is built to withstand the rigors of outdoor work, whether in residential yards or commercial landscaping projects. Its resistance to wear and tear ensures that it remains a reliable tool over time.

In summary, the Husqvarna Edger Attachment is a powerful, versatile, and user-friendly tool, perfect for achieving professional-grade landscaping results. With its innovative features, ergonomic design, and durability, it stands out as an invaluable asset for anyone looking to maintain clean, beautiful edges in their outdoor spaces. Whether you are a professional landscaper or a homeowner, this attachment enhances your ability to create and maintain tidy landscapes with ease and efficiency.
Top Page Image Contents