Husqvarna RZ54i / 967003604 warranty Transport, Spark Arrestor

Page 17

SAFETY

Transport

•The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer.

•Use a properly sized trailer to transport the machine. Activate the park brake, turn off the fuel supply, and fasten the machine with approved fastening devices, such as bands, chains, or straps, when transporting.

•Do not operate this machine on public roadways.

•Check and abide by local traffic regulations before transporting the machine on any road.

•Do not tow this machine, it may cause damage to the drive system.

•Load the unit onto truck or trailer by driving up ramps of suitable strength using a slow speed. Do not lift! The machine is not intended to be lifted by hand.

•When loading or unloading this machine, do not exceed the maximum recommended operation angle of 10O.

Towing

If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on towed equipment.

Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop. Do not tow on sloped ground. The weight of the towed equipment may cause loss of traction and loss of control.

Follow the manufacturer’s recommendation for weight limits for towed equipment. Do not tow near ditches, canals, and other hazards.

Spark Arrestor

This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forested, bush covered or grassy lands unless the engine's system is equipped with a spark arrestor meeting applicable local or state laws (if any).

In the state of California the above is required by law (Section 4442 of the California Public Resources Code).

Other states may have similar laws. Federal laws apply on federal lands.

A spark arrestor for the muffler is available through any authorized Husqvarna dealer.

WARNING!

Use extreme caution when loading the machine into a truck or trailer using ramps. There is the possibility of serious injury or death if the machine falls off the ramps.

IMPORTANT INFORMATION

The park brake is not sufficient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Always reverse the machine onto the transport vehicle to avoid tipping it over.

WARNING!

Escaping hydraulic oil under pressure can have sufficient force to penetrate the skin, causing serious injury. If injured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not administered immediately.

WARNING!

This mower is equipped with an internal combustion engine and should not

be used on or near any unimproved forested, bush covered or grassy lands unless the engine's system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsShut off engine before Performing any General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Safety System Spark Arrestor TransportControl Locations ControlsSteering Control Levers Cold Weather Control Park BrakeThrottle Control SmartSwitch Courtesy Buttons Blade SwitchIgnition Switch Seat Adjustment Lever Service MinderSeat should not be adjusted while unit is in motion Tracking KnobFuel Tank FuseFuel Shut Off Valve Cutting Height AdjusterBypass Linkages Always raise the deck to the highest position for transportSteering OperationTraining Resetting ignition system passcode SmartSwitch IgnitionBefore Starting Starting the Engine Place controls in neutral position Full throttle position Important Information Ignition System Faults Running Stopping the Engine Operating On Hills Mowing Tips Headlights Weak BatteryJumper Cables Use To remove cablesMoving Machine By Hand Battery Voltage LightChecking Battery Charge System Maintenance Schedule MaintenanceBefore After Year Replacing battery BatterySteering controls locked in neutral Tire Pressures Removal and installation of caster wheelAnti-scalp Rollers Caster WheelsDeck Belt Removal Deck Belt InstallationBelts Cutting Blades Leveling deck Adjusting the Mower DeckHardware CleaningUse protective glasses when cleaning and washing General LubricationLubrication Schedule Transmission Wheel and Deck ZerksDeck Spindles Front Wheel MountProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceStorage Schematic Dimensions Technical DataEngine TransmissionAccessories Torque SpecificationsStandard Hardware Metric Standard HardwareUSA requirements Conformity CertificatesDelivery Service Service JournalAfter the First 10 Hours Hour ServiceAt Least Once Each Year Page 115 650227 Rev a 2013-10-15

RZ54i / 967003604 specifications

The Husqvarna RZ54i, model number 967003604, is a premium zero-turn lawn mower designed for both homeowners and professional landscapers. This powerful machine is engineered to deliver exceptional performance, durability, and comfort, making it an ideal choice for maintaining large lawns and properties with precision.

One of the standout features of the RZ54i is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and plenty of power to tackle tough mowing tasks. With a cutting width of 54 inches, the mower is capable of covering large areas efficiently, allowing users to complete mowing jobs in a fraction of the time compared to traditional riding mowers.

The RZ54i incorporates a dual hydrostatic transmission, providing smooth and responsive maneuverability. The zero-turn design enables operators to make sharp turns and navigate around obstacles easily, which is especially beneficial for intricate landscapes and yards with multiple features. Additionally, the mower’s compact design allows it to access narrower spaces, enhancing its versatility.

Another key feature of the Husqvarna RZ54i is its cutting deck, constructed from heavy-duty steel for maximum durability. The mower features an adjustable cutting height range from 1.5 inches to 4 inches, allowing users to customize their mowing experience based on grass type and desired lawn appearance. The air induction technology improves grass lift for a cleaner cut and even grass dispersal, ensuring a professional finish.

Comfort is also a priority with the RZ54i, which is equipped with a comfortable high back seat and ergonomic steering controls. The intuitive control layout ensures that users can operate the mower easily, reducing fatigue during long mowing sessions.

Furthermore, the Husqvarna RZ54i includes a flat-free front tire design, eliminating the worry of flat tires and enhancing overall stability. This feature allows operators to focus on the task at hand without interruptions.

In conclusion, the Husqvarna RZ54i 967003604 is a feature-rich zero-turn mower that combines power, durability, and comfort. With its high-performance engine, advanced cutting technology, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency. Whether for residential use or landscape maintenance, the RZ54i provides an unparalleled mowing experience.
Top Page Image Contents