Husqvarna RZ54i / 967003604 warranty Operation, Training, Steering

Page 25

OPERATION

Read the Safety section and following pages, if you are unfamiliar with the machine.

Training

Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers.

This section should be reviewed in its entirety prior to attempting to move the mower under its own power. When first operating the mower or until becoming comfortable with controls, use a reduced throttle speed and reduced ground speed. DO NOT move control levers to the furthest forward or reverse positions during initial operation.

First time users should become familiar with the mower’s movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until the operator becomes comfortable with the mower controls and zero turning capability, overly aggressive maneuvers may damage turf.

Steering

To move forward and backward

The direction and speed of the mower’s movements are effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel. The right control lever controls the right wheel.

First time users should push the mower (see Moving Machine By Hand in the Operation section) to an open, flat area without other people, vehicles or obstacles nearby. To move the unit under its own power, the operator must sit in the seat and start the engine (see Before Starting in the Operation section). Adjust the engine speed to idle, disengage the park brake but do not engage the blades at this time. Rotate control levers inward. As long as the control levers have not been moved forward or backwards, the mower will not move.

Slowly move both control levers forward slightly. This will allow mower to start moving forward in a straight line. Pull the control levers back to the neutral position and the mower should stop moving.

Pull back slightly on control levers, allowing the mower to move backwards. Push the control levers forward to the neutral position and mower should stop moving.

To turn to the right

While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn to the left

While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn

While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically.

Then by alternating one lever slightly to the forward position and the other in the reverse position, complete the turn.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsShut off engine before Performing any Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Safety System Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Park BrakeCold Weather Control Ignition Switch Blade SwitchSmartSwitch Courtesy Buttons Seat Adjustment Lever Service MinderSeat should not be adjusted while unit is in motion Tracking KnobFuel Tank FuseFuel Shut Off Valve Cutting Height AdjusterBypass Linkages Always raise the deck to the highest position for transportTraining OperationSteering Resetting ignition system passcode SmartSwitch IgnitionBefore Starting Starting the Engine Place controls in neutral position Full throttle position Important Information Ignition System Faults Running Stopping the Engine Operating On Hills Mowing Tips Headlights Weak BatteryJumper Cables Use To remove cablesChecking Battery Charge System Battery Voltage LightMoving Machine By Hand Maintenance Schedule MaintenanceBefore After Year Replacing battery BatterySteering controls locked in neutral Tire Pressures Removal and installation of caster wheelAnti-scalp Rollers Caster WheelsBelts Deck Belt InstallationDeck Belt Removal Cutting Blades Leveling deck Adjusting the Mower DeckUse protective glasses when cleaning and washing CleaningHardware Lubrication Schedule LubricationGeneral Transmission Wheel and Deck ZerksDeck Spindles Front Wheel MountProblem Cause TroubleshootingTroubleshooting Storage ServiceWinter Storage Schematic Dimensions Technical DataEngine TransmissionAccessories Torque SpecificationsStandard Hardware Metric Standard HardwareUSA requirements Conformity CertificatesDelivery Service Service JournalAfter the First 10 Hours Hour ServiceAt Least Once Each Year Page 115 650227 Rev a 2013-10-15

RZ54i / 967003604 specifications

The Husqvarna RZ54i, model number 967003604, is a premium zero-turn lawn mower designed for both homeowners and professional landscapers. This powerful machine is engineered to deliver exceptional performance, durability, and comfort, making it an ideal choice for maintaining large lawns and properties with precision.

One of the standout features of the RZ54i is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and plenty of power to tackle tough mowing tasks. With a cutting width of 54 inches, the mower is capable of covering large areas efficiently, allowing users to complete mowing jobs in a fraction of the time compared to traditional riding mowers.

The RZ54i incorporates a dual hydrostatic transmission, providing smooth and responsive maneuverability. The zero-turn design enables operators to make sharp turns and navigate around obstacles easily, which is especially beneficial for intricate landscapes and yards with multiple features. Additionally, the mower’s compact design allows it to access narrower spaces, enhancing its versatility.

Another key feature of the Husqvarna RZ54i is its cutting deck, constructed from heavy-duty steel for maximum durability. The mower features an adjustable cutting height range from 1.5 inches to 4 inches, allowing users to customize their mowing experience based on grass type and desired lawn appearance. The air induction technology improves grass lift for a cleaner cut and even grass dispersal, ensuring a professional finish.

Comfort is also a priority with the RZ54i, which is equipped with a comfortable high back seat and ergonomic steering controls. The intuitive control layout ensures that users can operate the mower easily, reducing fatigue during long mowing sessions.

Furthermore, the Husqvarna RZ54i includes a flat-free front tire design, eliminating the worry of flat tires and enhancing overall stability. This feature allows operators to focus on the task at hand without interruptions.

In conclusion, the Husqvarna RZ54i 967003604 is a feature-rich zero-turn mower that combines power, durability, and comfort. With its high-performance engine, advanced cutting technology, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency. Whether for residential use or landscape maintenance, the RZ54i provides an unparalleled mowing experience.
Top Page Image Contents