Husqvarna RZ54i / 967003604 warranty Battery, Replacing battery

Page 40

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times.

CAUTION!

Always wear eye protection when around batteries.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to lose power.

1.Open the terminal access doors.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly.

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

3.Position deck to lowest setting.

4.Front underside of frame, remove the nuts that secure the battery hold-down.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold-down and secure with nuts removed in Step 4.

8.Reconnect RED battery cable to positive (+) battery terminal with bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut

10.Replace terminal boot cover.

11.Lower seat

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

8050-109

Remove battery hold-down to replace battery

40

Image 40
Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxShut off engine before Performing any Safety Instructions SafetyGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Safety System Transport Spark ArrestorControls Control LocationsSteering Control Levers Throttle Control Park BrakeCold Weather Control Ignition Switch Blade SwitchSmartSwitch Courtesy Buttons Service Minder Seat Adjustment LeverSeat should not be adjusted while unit is in motion Tracking KnobFuse Fuel TankCutting Height Adjuster Fuel Shut Off ValveBypass Linkages Always raise the deck to the highest position for transportTraining OperationSteering SmartSwitch Ignition Resetting ignition system passcodeBefore Starting Starting the Engine Place controls in neutral position Full throttle position Important Information Ignition System Faults Running Stopping the Engine Operating On Hills Mowing Tips Weak Battery HeadlightsJumper Cables Use To remove cablesChecking Battery Charge System Battery Voltage LightMoving Machine By Hand Maintenance Maintenance ScheduleBefore After Year Battery Replacing batterySteering controls locked in neutral Removal and installation of caster wheel Tire PressuresAnti-scalp Rollers Caster WheelsBelts Deck Belt InstallationDeck Belt Removal Cutting Blades Adjusting the Mower Deck Leveling deckUse protective glasses when cleaning and washing CleaningHardware Lubrication Schedule LubricationGeneral Wheel and Deck Zerks TransmissionDeck Spindles Front Wheel MountTroubleshooting Problem CauseTroubleshooting Storage ServiceWinter Storage Schematic Technical Data DimensionsEngine TransmissionTorque Specifications AccessoriesStandard Hardware Metric Standard HardwareConformity Certificates USA requirementsService Journal Delivery ServiceHour Service After the First 10 HoursAt Least Once Each Year Page 115 650227 Rev a 2013-10-15

RZ54i / 967003604 specifications

The Husqvarna RZ54i, model number 967003604, is a premium zero-turn lawn mower designed for both homeowners and professional landscapers. This powerful machine is engineered to deliver exceptional performance, durability, and comfort, making it an ideal choice for maintaining large lawns and properties with precision.

One of the standout features of the RZ54i is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and plenty of power to tackle tough mowing tasks. With a cutting width of 54 inches, the mower is capable of covering large areas efficiently, allowing users to complete mowing jobs in a fraction of the time compared to traditional riding mowers.

The RZ54i incorporates a dual hydrostatic transmission, providing smooth and responsive maneuverability. The zero-turn design enables operators to make sharp turns and navigate around obstacles easily, which is especially beneficial for intricate landscapes and yards with multiple features. Additionally, the mower’s compact design allows it to access narrower spaces, enhancing its versatility.

Another key feature of the Husqvarna RZ54i is its cutting deck, constructed from heavy-duty steel for maximum durability. The mower features an adjustable cutting height range from 1.5 inches to 4 inches, allowing users to customize their mowing experience based on grass type and desired lawn appearance. The air induction technology improves grass lift for a cleaner cut and even grass dispersal, ensuring a professional finish.

Comfort is also a priority with the RZ54i, which is equipped with a comfortable high back seat and ergonomic steering controls. The intuitive control layout ensures that users can operate the mower easily, reducing fatigue during long mowing sessions.

Furthermore, the Husqvarna RZ54i includes a flat-free front tire design, eliminating the worry of flat tires and enhancing overall stability. This feature allows operators to focus on the task at hand without interruptions.

In conclusion, the Husqvarna RZ54i 967003604 is a feature-rich zero-turn mower that combines power, durability, and comfort. With its high-performance engine, advanced cutting technology, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency. Whether for residential use or landscape maintenance, the RZ54i provides an unparalleled mowing experience.