Husqvarna RZ54i / 967003604 warranty Tire Pressures, Anti-scalp Rollers, Caster Wheels

Page 42

MAINTENANCE

Tire Pressures

All tires should be at 15 psi / 103 kPa / 1 bar.

IMPORTANT INFORMATION

DO NOT add any type of tire liner or foam fill material to the tires. Excessive loads created by foam filled tires will cause premature failures.

Only use O.E.M. specified tires.

IMPORTANT INFORMATION

Adjust anti-scalp rollers with the mower on a flat level surface.

Anti-scalp Rollers

Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions.

Anti-scalp rollers can be set in four positions. The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck.

IMPORTANT INFORMATION

To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck.

Caster Wheels

Check every 200 hours. Check that wheels rotate freely. If wheels do not rotate freely take the unit to your dealer for service.

Foam filled tires or solid tires will void the warranty.

Removal and installation of caster wheel

1.Remove nut and caster bolt.

2.Pull the wheel out of the yoke and take care of the spacers.

3.Install in reverse order. Tighten caster bolt.

8011-564

Check tire pressures

8058-135

Anti-scalp rollers

8058-055

Caster wheels

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operator Manual All rights reserved Contents Page Introduction Good Service Manufacturing NumberSymbols and Decals Xxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxxShut off engine before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Safety System Transport Spark ArrestorControls Control LocationsSteering Control Levers Park Brake Throttle ControlCold Weather Control Blade Switch Ignition SwitchSmartSwitch Courtesy Buttons Seat should not be adjusted while unit is in motion Service MinderSeat Adjustment Lever Tracking KnobFuse Fuel TankBypass Linkages Cutting Height AdjusterFuel Shut Off Valve Always raise the deck to the highest position for transportOperation TrainingSteering SmartSwitch Ignition Resetting ignition system passcodeBefore Starting Starting the Engine Place controls in neutral position Full throttle position Important Information Ignition System Faults Running Stopping the Engine Operating On Hills Mowing Tips Jumper Cables Use Weak BatteryHeadlights To remove cablesBattery Voltage Light Checking Battery Charge SystemMoving Machine By Hand Maintenance Maintenance ScheduleBefore After Year Battery Replacing batterySteering controls locked in neutral Anti-scalp Rollers Removal and installation of caster wheelTire Pressures Caster WheelsDeck Belt Installation BeltsDeck Belt Removal Cutting Blades Adjusting the Mower Deck Leveling deckCleaning Use protective glasses when cleaning and washingHardware Lubrication Lubrication ScheduleGeneral Deck Spindles Wheel and Deck ZerksTransmission Front Wheel MountTroubleshooting Problem CauseTroubleshooting Service StorageWinter Storage Schematic Engine Technical DataDimensions TransmissionStandard Hardware Torque SpecificationsAccessories Metric Standard HardwareConformity Certificates USA requirementsService Journal Delivery ServiceHour Service After the First 10 HoursAt Least Once Each Year Page 115 650227 Rev a 2013-10-15

RZ54i / 967003604 specifications

The Husqvarna RZ54i, model number 967003604, is a premium zero-turn lawn mower designed for both homeowners and professional landscapers. This powerful machine is engineered to deliver exceptional performance, durability, and comfort, making it an ideal choice for maintaining large lawns and properties with precision.

One of the standout features of the RZ54i is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and plenty of power to tackle tough mowing tasks. With a cutting width of 54 inches, the mower is capable of covering large areas efficiently, allowing users to complete mowing jobs in a fraction of the time compared to traditional riding mowers.

The RZ54i incorporates a dual hydrostatic transmission, providing smooth and responsive maneuverability. The zero-turn design enables operators to make sharp turns and navigate around obstacles easily, which is especially beneficial for intricate landscapes and yards with multiple features. Additionally, the mower’s compact design allows it to access narrower spaces, enhancing its versatility.

Another key feature of the Husqvarna RZ54i is its cutting deck, constructed from heavy-duty steel for maximum durability. The mower features an adjustable cutting height range from 1.5 inches to 4 inches, allowing users to customize their mowing experience based on grass type and desired lawn appearance. The air induction technology improves grass lift for a cleaner cut and even grass dispersal, ensuring a professional finish.

Comfort is also a priority with the RZ54i, which is equipped with a comfortable high back seat and ergonomic steering controls. The intuitive control layout ensures that users can operate the mower easily, reducing fatigue during long mowing sessions.

Furthermore, the Husqvarna RZ54i includes a flat-free front tire design, eliminating the worry of flat tires and enhancing overall stability. This feature allows operators to focus on the task at hand without interruptions.

In conclusion, the Husqvarna RZ54i 967003604 is a feature-rich zero-turn mower that combines power, durability, and comfort. With its high-performance engine, advanced cutting technology, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency. Whether for residential use or landscape maintenance, the RZ54i provides an unparalleled mowing experience.
Top Page Image Contents