Husqvarna RZ54i / 967003604 warranty Before Starting

Page 27

OPERATION

Before Starting

1.Read the sections on Safety and Controls before starting the machine.

2.Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section).

3.Check that there is sufficient fuel in the fuel tank.

4.Adjust the seat to the desired position.

8058-252

Lengthways adjustment

5. Set the deck cutting height by inserting the lift pin into the desired cut height.

The following conditions must be fulfilled before the engine can be started:

• The blade switch must be pressed downward into the disengaged position.

• The park brake must be up into the activated position.

• Both steering controls must be in the locked (outer) neutral position.

8058-255

Secure selected cutting height

27

Image 27
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsShut off engine before Performing any Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Safety System Spark Arrestor TransportControl Locations ControlsSteering Control Levers Park Brake Throttle ControlCold Weather Control Blade Switch Ignition SwitchSmartSwitch Courtesy Buttons Tracking Knob Service MinderSeat Adjustment Lever Seat should not be adjusted while unit is in motionFuel Tank FuseAlways raise the deck to the highest position for transport Cutting Height AdjusterFuel Shut Off Valve Bypass LinkagesOperation TrainingSteering Resetting ignition system passcode SmartSwitch IgnitionBefore Starting Starting the Engine Place controls in neutral position Full throttle position Important Information Ignition System Faults Running Stopping the Engine Operating On Hills Mowing Tips To remove cables Weak BatteryHeadlights Jumper Cables UseBattery Voltage Light Checking Battery Charge SystemMoving Machine By Hand Maintenance Schedule MaintenanceBefore After Year Replacing battery BatterySteering controls locked in neutral Caster Wheels Removal and installation of caster wheelTire Pressures Anti-scalp RollersDeck Belt Installation BeltsDeck Belt Removal Cutting Blades Leveling deck Adjusting the Mower DeckCleaning Use protective glasses when cleaning and washingHardware Lubrication Lubrication ScheduleGeneral Front Wheel Mount Wheel and Deck ZerksTransmission Deck SpindlesProblem Cause TroubleshootingTroubleshooting Service StorageWinter Storage Schematic Transmission Technical DataDimensions EngineMetric Standard Hardware Torque SpecificationsAccessories Standard HardwareUSA requirements Conformity CertificatesDelivery Service Service JournalAfter the First 10 Hours Hour ServiceAt Least Once Each Year Page 115 650227 Rev a 2013-10-15

RZ54i / 967003604 specifications

The Husqvarna RZ54i, model number 967003604, is a premium zero-turn lawn mower designed for both homeowners and professional landscapers. This powerful machine is engineered to deliver exceptional performance, durability, and comfort, making it an ideal choice for maintaining large lawns and properties with precision.

One of the standout features of the RZ54i is its robust 24 HP Kohler engine. This powerful engine ensures reliable starting and plenty of power to tackle tough mowing tasks. With a cutting width of 54 inches, the mower is capable of covering large areas efficiently, allowing users to complete mowing jobs in a fraction of the time compared to traditional riding mowers.

The RZ54i incorporates a dual hydrostatic transmission, providing smooth and responsive maneuverability. The zero-turn design enables operators to make sharp turns and navigate around obstacles easily, which is especially beneficial for intricate landscapes and yards with multiple features. Additionally, the mower’s compact design allows it to access narrower spaces, enhancing its versatility.

Another key feature of the Husqvarna RZ54i is its cutting deck, constructed from heavy-duty steel for maximum durability. The mower features an adjustable cutting height range from 1.5 inches to 4 inches, allowing users to customize their mowing experience based on grass type and desired lawn appearance. The air induction technology improves grass lift for a cleaner cut and even grass dispersal, ensuring a professional finish.

Comfort is also a priority with the RZ54i, which is equipped with a comfortable high back seat and ergonomic steering controls. The intuitive control layout ensures that users can operate the mower easily, reducing fatigue during long mowing sessions.

Furthermore, the Husqvarna RZ54i includes a flat-free front tire design, eliminating the worry of flat tires and enhancing overall stability. This feature allows operators to focus on the task at hand without interruptions.

In conclusion, the Husqvarna RZ54i 967003604 is a feature-rich zero-turn mower that combines power, durability, and comfort. With its high-performance engine, advanced cutting technology, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency. Whether for residential use or landscape maintenance, the RZ54i provides an unparalleled mowing experience.