Recording Still Images on a Memory Card
You can record still images with the camcorder, from a tape in the camcorder
(
DV terminal or AV terminal (
PHOTO button
Card access indicator
E
❍Do not turn off the camcorder, disconnect the power source or remove the memory card while the card access display (<<< or >>>) in the upper right corner of the screen or the card access indicator is flashing. Doing so could result in data damage.
❍When you are using a SD Memory Card, make sure that the protect switch is set to allow recording.
Make sure to insert a memory card with enough remaining capacity.
In autofocus mode, the camcorder keeps focusing automatically. Furthermore, this camcorder is equipped with the
focusing (
When the program selector is set to [, the
CAMERA | PLAY (VCR) | CARD CAMERA | CARD PLAY (VCR) |
A white focusing frame appears in the center of the screen. The camcorder will focus on the subject in the center of the screen. To change the focusing point, see Selecting a
Focusing Point (
• F and focusing frame turn green when focus is adjusted. The beep sounds twice. The picture may appear out of focus for a moment while the camcorder is focusing.
• Exposure is locked.
•Focus can be adjusted manually with the focus ring when the PHOTO button is pressed halfway.
•When you press the PHOTO button on the wireless controller, recording starts immediately.
Card Memory a Using
105