Canon 10, optura20 Using the VL-3Video Light (Optional), 3.Tighten the shoe lock, 1.Remove the accessory shoe cover, 4.Set the camcorder to CAMERA or CARD CAMERA mode

Using the VL-3 Video Light (Optional)

This video light enables you to record brightly in color even in dark places. This VL-3

E

Video Light attaches to the camcorder’s advanced accessory shoe for cable-free operation and is powered by the camcorder’s power supply.

Refer also to the VL-3 Video Light instruction manual.

❍Always turn off the camcorder before attaching/removing the video light.

❍Do not touch or place flammable material or plastic close to the lamp or the surrounding parts during or immediately after use; they become very hot.

❍Do not look directly at the lamp while the video light is on.

❍Do not carry the camcorder by the video light.

1.Remove the accessory shoe cover.

2.Slide the video light into the accessory shoe until it clicks.

3.Tighten the shoe lock.

Be careful that the video light does not come off when tightening the shoe lock.

4.Set the camcorder to CAMERA or CARD CAMERA mode.5.Set the video light’s power switch to AUTO or ON.

• (Connection) appears.

•ON: The video light stays on.

•AUTO: The video light turns on and off automatically.

q

w

r

e

t

LOCK

	AU	TO
		ON
OF	F

Range Full the Using Features of

71