Canon 10, optura20 Playing Back on a TV Screen, TVs with S (S1)-VideoInput Terminal, 1.Turn off all devices before starting the connections

E

Playing Back on a TV Screen

You can connect the camcorder to a TV or VCR to play back your recordings on a TV

screen.

❍Make sure that “H” is not displayed on the screen. If “H” is displayed, change

the setting ( 70).

❍When you use the TV as a monitor during recording, keep the TV volume turned down as long as the camcorder’s audio terminals are connected. An unpleasant high-pitched squeal, called feedback, may be produced if sound from the TV speakers is picked up by the microphone.

❍For high picture quality, we recommend using a TV with an S (S1) terminal.

❍ TVs with S1-terminal or Video ID-1 system: Recordings made in the 16:9 mode

( 50) will be automatically played back in wide screen mode.

Mastering the Basics

TVs with S (S1)-Video Input Terminal

Refer also to the TV or VCR instruction manual.

	INPUT
Signal flow	S(S1)-VIDEO
S-150 S-video Cable (optional)	VIDEO
	AUDIO
	L
Signal flow
STV-250N Stereo Video Cable (supplied)	R

1.Turn off all devices before starting the connections.2.Connect the S-150 S-video Cable (optional) to the S-video terminals.

40