Canon 10, optura20 Playing Back a Memory Card, Single Image Display, 1.Set the camcorder to CARD PLAY (VCR) mode, 3. To play back a movie, press the e/a button

Playing Back a Memory Card

You can play back memory card images on the LCD screen, viewfinder screen, or on a

connected TV screen (see Playing Back on a TV Screen 40).

E

You can display a single image (single image display), 6 at one time (index screen

116), or one after another (slide show 116). Use the Card Jump function to quickly

locate an image without displaying them one by one ( 117).

❍Images not recorded with this camcorder, uploaded from a computer (except

the sample images 138), edited on a computer and images whose file names have been changed may not be played back correctly.

❍Do not turn off the camcorder, disconnect the power source or remove the memory card while the card access display (<<<) in the upper right of corner of the screen or the card access indicator is flashing. Doing so could result in data damage.

❍Make sure to insert a memory card that contains images.

❍ Only date and time will be displayed when pressing the DATA CODE button.

❍You can enlarge still images up to 5 times during playback ( 83).

Single Image Display

CAMERA PLAY (VCR) CARD CAMERA CARD PLAY (VCR)

1.Set the camcorder to CARD PLAY (VCR) mode.

•The last recorded image appears.

•Movies are displayed with the first scene as a still image indicated by “e/a”.

2.Press the CARD +/– button to move between images.

Press the CARD + button to display the next image and the

CARD – button to display the previous image.

3. To play back a movie, press the e/a button.

The last scene appears as a still image when playback is complete.

Card Memory a Using

115